@Spectre660:
Well I installed everything from scratch including update2.
So far everything works - excluding minigl apps - but I could never manage them to work since my on-board gfx died and I use pci gfx card.
I can live with this - even it's a pitty.
All screen modes work so far well under update2.
So i dared it again and installed U3 BUT....freezze.......
At this point I think I go on with Update2 - this works really good.
Having no USB 2.0 is acceptable - even it's a pitty.
But I really like to try out the new MUI OWB - but I guess for this Update3 is mandatory - at least the MUI classes.
Can I get the newest classes elsewhere or can I install U3 to another location then sys: and copy all new classes from there?
Thanx a lot !
Andi
LoadWB freezes completely with Update3
Re: LoadWB freezes completely with Update3
Just curious.
When you get to the last step in the Up3 process, are you un-checking the box that says something about
rebooting before clicking the Finalize in the lower right corner?
If not then give it a try, switching the computer completely off to reboot afterwards.
When you get to the last step in the Up3 process, are you un-checking the box that says something about
rebooting before clicking the Finalize in the lower right corner?
If not then give it a try, switching the computer completely off to reboot afterwards.
A-Eon A1X1000 ATI HD6850, Creative SB1570 PCIe, RTL8139 net PCI.
-
- Posts: 1525
- Joined: Sat Jun 18, 2011 2:16 pm
- Location: Montserrat
Re: LoadWB freezes completely with Update3
Your issue may have something to do with the uboot settings for using a PCI Graphics card in a Sam 440ep. You might be able get Acube's help here.
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
Re: LoadWB freezes completely with Update3
Following on from AmigaWorld, how far does the Startup-Sequence get? At what command does it freeze?I can enter the early startup control and boot without startup-sequence.
-
- Posts: 1525
- Joined: Sat Jun 18, 2011 2:16 pm
- Location: Montserrat
Re: LoadWB freezes completely with Update3
Another thing may be the dual graphics card setup from Acube .
http://www.acube-systems.biz/download/D ... dSetup.lha
http://www.acube-systems.biz/download/D ... dSetup.lha
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
Re: LoadWB freezes completely with Update3
@All:
Thanx a lot so far for all your hints and time.
I installed update3 again and unchecked the last box to reboot and restartet the Amiga by switching off and on again.
Unfortunately the same problem ...
But I managed to find at least the command in startup-sequence that causes the lock:
It's c:LoadMonDrvs
When I uncomment it the system comes up into a 640x480 Workbench screen !
Is that maybe the point to look further?
In addition I mailed to Acube if they can provide me with u-boot settings but haven't got an answer yet.
Andi
Thanx a lot so far for all your hints and time.
I installed update3 again and unchecked the last box to reboot and restartet the Amiga by switching off and on again.
Unfortunately the same problem ...
But I managed to find at least the command in startup-sequence that causes the lock:
It's c:LoadMonDrvs
When I uncomment it the system comes up into a 640x480 Workbench screen !
Is that maybe the point to look further?
In addition I mailed to Acube if they can provide me with u-boot settings but haven't got an answer yet.
Andi
Re: LoadWB freezes completely with Update3
Yes that's a point have you updated your SAMep to 1.3.1d?
http://www.acube-systems.biz/download/S ... 110215.zip
Have you done this?
http://www.acube-systems.biz/common/fil ... update.lha
And do you activate this in WBStartup?
http://www.acube-systems.biz/common/fil ... _setup.lha
Please excuse me if anything has already been covered just looking at all the update options
http://www.acube-systems.biz/download/S ... 110215.zip
Have you done this?
http://www.acube-systems.biz/common/fil ... update.lha
And do you activate this in WBStartup?
http://www.acube-systems.biz/common/fil ... _setup.lha
Please excuse me if anything has already been covered just looking at all the update options
~Yes I am a Kiwi, No, I did not appear as an extra in 'Lord of the Rings'~
1x AmigaOne X5000 2.0GHz 2gM RadeonR9280X AOS4.x
3x AmigaOne X1000 1.8GHz 2gM RadeonHD7970 AOS4.x
1x AmigaOne X5000 2.0GHz 2gM RadeonR9280X AOS4.x
3x AmigaOne X1000 1.8GHz 2gM RadeonHD7970 AOS4.x
Re: LoadWB freezes completely with Update3
@Slayer:
I have uboot 1.31d and everything else set up!
Now I can use a resolution up to 1280x1024 with 256 colors pretty stable.
With RGB colors it's not stable - sometmimes freezes sometimes not.
ARGB32 is not possible at any resolution.
BUT it's a big step forward !!!
Thanx a lot for all your help.
Do you think there are still things left that can be tuned to run the system stable wirh RGB Colors?
ARGB32 is not mandatory.
ANdi
I have uboot 1.31d and everything else set up!
Now I can use a resolution up to 1280x1024 with 256 colors pretty stable.
With RGB colors it's not stable - sometmimes freezes sometimes not.
ARGB32 is not possible at any resolution.
BUT it's a big step forward !!!
Thanx a lot for all your help.
Do you think there are still things left that can be tuned to run the system stable wirh RGB Colors?
ARGB32 is not mandatory.
ANdi
-
- Posts: 1525
- Joined: Sat Jun 18, 2011 2:16 pm
- Location: Montserrat
Re: LoadWB freezes completely with Update3
Sounds like it could still also be be a video card issue.
I had the same resolution limits with my defective card.
Try the GFXbench2d program again with the 16 bit and 32 bit screen options after booting with the 8 bit screen and see if it finishes ok.
I had the same resolution limits with my defective card.
Try the GFXbench2d program again with the 16 bit and 32 bit screen options after booting with the 8 bit screen and see if it finishes ok.
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
Re: LoadWB freezes completely with Update3
@Spectre660:
These test all fail only 8 bit modes are okay with gfxbench2d.
But why did the card work correctly under update2 ???
There I coul use any mode?
These test all fail only 8 bit modes are okay with gfxbench2d.
But why did the card work correctly under update2 ???
There I coul use any mode?