OS4.1 install on Sam460ex HD not recognised
Posted: Tue Aug 15, 2017 1:29 pm
I described my problem here
http://wiki.amigaos.net/wiki/UserDoc:How_AmigaOS_Works
I am getting desperate
In short, my sam460ex HD is dead, and I was unable to restart my Sam 440,
So I Replaced HD by one of my old Sam440
Reformatted a partition , made it bootable, set the others to non bootable,
Was able to access all partitions using the OS4.1FE
installed OS4.1 FE on the boot partitition
Set uboot bott devices to
1 3x12 SATA HD
2 3114 SATA HD
3 460 SATA2 HD
Checked
pci
... 0x3512 Mass storage controller ..
....
sata info 0
...
SATA device 1: Model: ST9160821AS ...
Supports 48-bit addressing
..............'... 149.0 GB (312581808 x 512)
On booting the HD is not recognised ,
I get msg
Parthenogenesis (ub21b) version 0.91
No menu.1st or Kicklayout found
Then
AOS4 FLB
Loadsector error when reading from block 0
FLB no SLB found in any '..........'
===============
To disentangle the error messages
I tested
With only one active device:
The loadsector error is generated with the 460 Device
The parthenogenesis message ( No menu.1st or kicklayout with the 3x12 device
All state "hard disk not found" or something like that
Help really appreciated,
http://wiki.amigaos.net/wiki/UserDoc:How_AmigaOS_Works
I am getting desperate
In short, my sam460ex HD is dead, and I was unable to restart my Sam 440,
So I Replaced HD by one of my old Sam440
Reformatted a partition , made it bootable, set the others to non bootable,
Was able to access all partitions using the OS4.1FE
installed OS4.1 FE on the boot partitition
Set uboot bott devices to
1 3x12 SATA HD
2 3114 SATA HD
3 460 SATA2 HD
Checked
pci
... 0x3512 Mass storage controller ..
....
sata info 0
...
SATA device 1: Model: ST9160821AS ...
Supports 48-bit addressing
..............'... 149.0 GB (312581808 x 512)
On booting the HD is not recognised ,
I get msg
Parthenogenesis (ub21b) version 0.91
No menu.1st or Kicklayout found
Then
AOS4 FLB
Loadsector error when reading from block 0
FLB no SLB found in any '..........'
===============
To disentangle the error messages
I tested
With only one active device:
The loadsector error is generated with the 460 Device
The parthenogenesis message ( No menu.1st or kicklayout with the 3x12 device
All state "hard disk not found" or something like that
Help really appreciated,