Hi,
My config : A4000T, CyberstormPPC, Repulse board, Catweasel board, Deneb board, XSurf board.
My USB Zorro Board Deneb ZIII :
--> Works with Amiga OS 3.9, 4.0 & 4.1 first edition.
--> Doesn't work with Amiga OS 4.1 Final Edition : at the OS 4.1 boot, i have a multicolored reboot process and the cycle starts over again, and again ... (if i remove the Deneb board, the problem disapears).
Could you help me ?
Thanks for your help.
Deneb ZIII & Amiga OS 4.1 Final edition
-
- Posts: 314
- Joined: Mon May 14, 2012 10:26 pm
- Location: 日本千葉県松戸市 / Matsudo City, Chiba, Japan
- Contact:
Re: Deneb ZIII & Amiga OS 4.1 Final edition
Have you looked at any updates for the DenebZ3 for changes after OS4.1 to OS4.1FE ?
as I know on my own sam440flex system I had a kernel update along with some USB device changes
so maybe the drivers for the DenebZ3 also need to be updated for AOS4.1FE ?
Just my own question... if you remove any autoboot modules from the FlashROM on the DenebZ3,
does AOS4.1FE become bootable without the colors while the DenebZ3 is installed ?
as I know on my own sam440flex system I had a kernel update along with some USB device changes
so maybe the drivers for the DenebZ3 also need to be updated for AOS4.1FE ?
Just my own question... if you remove any autoboot modules from the FlashROM on the DenebZ3,
does AOS4.1FE become bootable without the colors while the DenebZ3 is installed ?
-
- Posts: 2
- Joined: Sun Jun 10, 2018 6:10 pm
Re: Deneb ZIII & Amiga OS 4.1 Final edition
The Dened has the last firmware (11) and there is no autoboot modules in the FlashROM.
Re: Deneb ZIII & Amiga OS 4.1 Final edition
Obviously you did it, but did you try to boot from the 4.1FE cd instead of your harddrive ? To avoid modifications of the startup files.teslamaitre wrote:The Dened has the last firmware (11) and there is no autoboot modules in the FlashROM.
-
- Posts: 35
- Joined: Sat Jun 18, 2011 4:56 pm
- Location: Wolfach / Germany
Re: Deneb ZIII & Amiga OS 4.1 Final edition
Your DENEB Card falls in conflict with the xsurf board! The DENEB Firmware 11 includes an "ghost-xsurf" to enable Network-Hardware on her clockport. There is anteslamaitre wrote:Hi,
My config : A4000T, CyberstormPPC, Repulse board, Catweasel board, Deneb board, XSurf board.
Could you help me ?
Firmware Version 11 available without this "Shadow-Board" this should do the trick.....
If it is allowed, I can attach the modified V11_noXsurf Firmware to the Thread...