Correction to the FAQ
Posted: Fri May 10, 2013 8:52 am
I think there is an error in the FAQ for Classic regarding the jumpers on Mediator. It says that with Voodoo 3/5/5 gfx cards the Winzice jumper has to be open. That is not the case - at least not on my Mediator 4000DiMK2 with a Voodoo 5 - 5500, 10MB ethernet and SB128.
When the jumper is open the system resets itself repeatedly during boot. Boots fine with the jumper closed.
Hope this helps others.
When the jumper is open the system resets itself repeatedly during boot. Boots fine with the jumper closed.
Hope this helps others.