Instaling - final Edition on A4000T

A forum for Classic Amiga specific support issues.

Instaling - final Edition on A4000T

Postby Rotzloeffel » Tue May 24, 2016 9:00 pm

Hi Folks...I have a crazy issue....

I have a A4000T with HD and CD-Rom connected on the internal IDE Port

When I try to install OS 4.1 FE the system allways crashes when starting the installation utility. When I boot to Workbench I can start the Installation Utility and Install the System with a little luck (crashes mostly!)

When I disconect the IDE Drives and use CVPP-SCSI only, install works fine!

I put the EXACTLY same Config (changing all cards and drives) into A4000D... No Problem at all :shock:

Is there a known issue with the A4000 IDE scsi.device ?? Ih have no further idea :roll:
Rotzloeffel
 
Posts: 32
Joined: Sat Jun 18, 2011 5:56 pm
Location: Wolfach / Germany

Re: Instaling - final Edition on A4000T

Postby DarrenHD » Mon Jun 13, 2016 3:14 am

Rotzloeffel wrote:Hi Folks...I have a crazy issue....

I have a A4000T with HD and CD-Rom connected on the internal IDE Port

When I try to install OS 4.1 FE the system allways crashes when starting the installation utility. When I boot to Workbench I can start the Installation Utility and Install the System with a little luck (crashes mostly!)

When I disconect the IDE Drives and use CVPP-SCSI only, install works fine!

I put the EXACTLY same Config (changing all cards and drives) into A4000D... No Problem at all :shock:

Is there a known issue with the A4000 IDE scsi.device ?? Ih have no further idea :roll:


Not that I am aware of. I have an A4000T with an IDE hard drive and IDE CDROM, and a CS PPC with SCSI hard disk. I have not had that issue. Not sure what to say unfortunately. If you are somehow able to get a serial log and turn on debug that may help, but I don't think the installation CD uses the debug kernel.

If you have a burnt ISO you can try re-burning the ISO using a different program. I've had some trouble with bad burns that appeared to be ok. The installation utility would suddenly just exit before it was finished. Microsoft's built in ISO (disk image burner) does work. Power ISO tends to give bad burns and I avoid it.


Darren
AmigaOS 4.x Beta Tester - Classic Amiga enthusiast - http://www.hd-zone.com is my Amiga Blog, check it out!
User avatar
DarrenHD
Beta Tester
Beta Tester
 
Posts: 633
Joined: Mon Dec 20, 2010 4:38 pm
Location: London, Ontario, Canada


Return to Platform: Classic

Who is online

Users browsing this forum: No registered users and 3 guests

cron