DarrenHD wrote:Benny wrote:I have a Radeon 7000 pci in my 4000 with Mediator, it has vga which works ok on my Samsung 730BF monitor.
But dvi gives me a lot of seconds of black screen, this is after the Workbench has to refresh, after moving a Window or scroll content in a Shell e.g. , the screen goes black and comes back to the Workbench.
Dcc is activated in the prefs.
Also on my Dell 24 inch fullhd this is the case.
Hmm, is it possible you can post a video of what is happening when it's connected to DVI under OS4? Does it behave the same when you connect it with VGA on OS4?
Thank you for your reply.
Yes here is a small clip for DVI:
https://dl.dropboxusercontent.com/u/293 ... .39.07.mp4Spec:
Workbench 1024x768 ARGB32, Radeon settings auto detect in screenmode. The Radeon 7000 is connected to DVI on the Samsung 730BF monitor.
Some notes:
1. Lowering the resolution from 1280x1024 to 1024x768 gives less 'black screen'.
2. I used various Radeons, Voodoo's, RadeonHD with my AmigaOne 500 without any problems with DVI on many monitors.
3. The Samsung monitor does not give any message like out of sync or out of range, or no signal. But the black screens are maybe to short to get noticed bij the monitor.