SAM440EP Restart/Reboot problem

This forum is for all AmigaOne 500, Sam440 and Sam460 specific issues.

SAM440EP Restart/Reboot problem

Postby dh1 » Thu Jun 13, 2013 7:51 pm

Hi all!

Please help!

When I restart AMIGAOS4.1u6 was, after the title screen I get the following message:

Please insert
ENV:
in any drive
Process: 17 "GrimReaper"

Then:

Guru Meditation: 80000003
Task 0x5FD0A790 ("")
generated an error of type DSI (Data Storage Interrupt)
on adress 0x0166F45C
Redzone was not damaged
Stackpointer is inside bounds

Only the on-off switch helps.

Only reboot/restart ...
The basic start is normal.

It was nothing changes in the STARTUP and USER STARTUP scripts.
The file system is the latest PPC SFS.
U2 update work with restart and OS4.1 CD-ROM as well.
After U3 is a cast update Reboot so you can stop.
Interestingly, not all the time!
Sometimes it restarts okay.

PSU: mini ATX desktop - I replaced the power supply is another.
One SATA HDD and a SATA CD drive in your computer.
R9200 is a PCI slot.
USB devices wireless keyboard and mouse.
Interestingly, the error only works when the mouse up and down directions ...

This to me is an old problem.
Occurs even after a clean OS install, but only after U3.

Therefore, I think that this problem is not hardware investment.
More like a software problem.

My Config:
SAM440EP Mini-ITX 667 with latest FW
512 MByte RAM
AOS4.1.6

Thanx!
User avatar
dh1
 
Posts: 15
Joined: Mon Dec 26, 2011 11:56 pm
Location: Hungary

Re: SAM440EP Restart/Reboot problem

Postby tonyw » Fri Jun 14, 2013 2:01 am

Just to prove to yourself that the hardware is OK, plug the Install CD back in and make sure that it boots OK and you can open windows, etc.

Sorry that I can't be more helpful, but somehow you have corrupted your installation. There is no safe way to repair it, I would advise you to format the partition and start again with the whole series of updates. Do not install any other software or even change preferences.

As long as you install *only* the updates, it is guaranteed to work. Do not install anything else until you have a clean Update 6 installed, running and copied to a spare partition. If you keep some backups of the Clean Updates on spare, small partitions, then you won't have to go through the whole process again.
cheers
tony
User avatar
tonyw
AmigaOS Core Developer
AmigaOS Core Developer
 
Posts: 1321
Joined: Wed Mar 09, 2011 2:36 pm
Location: Sydney, Australia

Re: SAM440EP Restart/Reboot problem

Postby dh1 » Fri Jun 14, 2013 8:08 am

Hi Tonyw!

Thanks for the quick reply!
A friend of mine advised deactivated by the EHCI.USBHCD module in the Kickstart (Kicklayout file).

Working!

Since then restart/reboot it works fine ...

What could be causing this problem?

Regards,
dh1
Amiga Mania Magazin
http://www.facebook.com/AmigaManiaMagazin
http://issuu.com/amigamania
User avatar
dh1
 
Posts: 15
Joined: Mon Dec 26, 2011 11:56 pm
Location: Hungary

Re: SAM440EP Restart/Reboot problem

Postby dh1 » Fri Jun 14, 2013 8:19 am

Oops.
A few minutes ago, I repeated the problem.
It is not the solution.
Sorry! :(
User avatar
dh1
 
Posts: 15
Joined: Mon Dec 26, 2011 11:56 pm
Location: Hungary

Re: SAM440EP Restart/Reboot problem

Postby zappa2009 » Fri Jun 14, 2013 6:34 pm

Remember: Every Update reaktivate Your Kicklayout !

Bevor I reboot on my A1-XE i do reconfigure my Kicklayout and Burn an BootCD wirh AmiDVD. (I startet after Update4)
But bevor i Do a clean Install put all Updates on a seperate Partitions or so. Much easier ;)
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9
User avatar
zappa2009
 
Posts: 230
Joined: Tue Jun 21, 2011 1:17 pm


Return to Platform: AmigaOne 500 and Sam series

Who is online

Users browsing this forum: No registered users and 1 guest