Delock PCI Express Sound Card 7.1
Posted: Sun Jul 28, 2013 2:40 pm
Hi All
Just wanted to Report that the Above Mentioned card works fine with the sam460ex Board under Os4.1 update 6, make sure jumper 16 on the MotherBoard is open before fitting, To set the Card up in AHI First make sure the eny24ht driver is in the Audiomodes Directory in devs: if it not it will proberly be in storage: move it over. If its not there make sure your using update 6 with amiupdate,Same goes for the AHIdriver draw then reboot then open PREFS: AHI ,First of all in Ahi menu under EDIT click on Reset to Defaults THIS IS IMPORTANT to Reduce PROBLEMS BY SETUP.
Select ENVY24HT:HiFi 16bit stereo ++ using first Music Unit set Frequency to 41000 or 48000, then change to unit 0 SET Frequency the same value then set channel to 2, do this for all unit 0-3. Then under Advanced Settings set volume Scaling to Safe,dynamic to reduce clipping in sound when programs try to play with a volume over 0db.
Note That this card can only use sample rates up to 48000Hz no Higher. Then Enjoy reduces cpu usage by 15%ish and costs a fith of what the esi costs OK it can only sample to 48000Hz unless you use a TOP Notch Sound studio/System Thats more then enough.
Any one want to Know where i Ordered it Please PM as im not sure if it would be classed as advertisng here in the forum if i posted the Link.
Im very pleased with the card and everything works what i,ve chucked at it. ok the Mixer doesn,t work but i never used it any way,i got remote for my sound system for the volume.So Know my pciex slot isn,t jealous anymore of the others lol:
Thanks Acube and Os4.1 CREW
Regards Laurence
Just wanted to Report that the Above Mentioned card works fine with the sam460ex Board under Os4.1 update 6, make sure jumper 16 on the MotherBoard is open before fitting, To set the Card up in AHI First make sure the eny24ht driver is in the Audiomodes Directory in devs: if it not it will proberly be in storage: move it over. If its not there make sure your using update 6 with amiupdate,Same goes for the AHIdriver draw then reboot then open PREFS: AHI ,First of all in Ahi menu under EDIT click on Reset to Defaults THIS IS IMPORTANT to Reduce PROBLEMS BY SETUP.
Select ENVY24HT:HiFi 16bit stereo ++ using first Music Unit set Frequency to 41000 or 48000, then change to unit 0 SET Frequency the same value then set channel to 2, do this for all unit 0-3. Then under Advanced Settings set volume Scaling to Safe,dynamic to reduce clipping in sound when programs try to play with a volume over 0db.
Note That this card can only use sample rates up to 48000Hz no Higher. Then Enjoy reduces cpu usage by 15%ish and costs a fith of what the esi costs OK it can only sample to 48000Hz unless you use a TOP Notch Sound studio/System Thats more then enough.
Any one want to Know where i Ordered it Please PM as im not sure if it would be classed as advertisng here in the forum if i posted the Link.
Im very pleased with the card and everything works what i,ve chucked at it. ok the Mixer doesn,t work but i never used it any way,i got remote for my sound system for the volume.So Know my pciex slot isn,t jealous anymore of the others lol:
Thanks Acube and Os4.1 CREW
Regards Laurence