I try Radeon7000 S-VHS out connect to Neptun Genlock.

This forum is for all AmigaOne 500, Sam440 and Sam460 specific issues.
Post Reply
AliveMOon
Posts: 3
Joined: Mon Sep 16, 2013 7:44 pm

I try Radeon7000 S-VHS out connect to Neptun Genlock.

Post by AliveMOon »

I try Radeon7000 S-VHS out connect to Neptun Genlock .

The uBoot screen perfect work, but I do not know the same access to the settings in OS4 Picasso96.

Image

uBoot well!

Image

Almost good!

Image


Want to know what framesize and pixelclock work uBoot?

Does anyone have information on this?

Thanx!
User avatar
tonyw
AmigaOS Core Developer
AmigaOS Core Developer
Posts: 1479
Joined: Wed Mar 09, 2011 1:36 pm
Location: Sydney, Australia

Re: I try Radeon7000 S-VHS out connect to Neptun Genlock.

Post by tonyw »

Obviously your screenmode does not have the same horizontal rate as the picture in the foreground. Very close, but slightly greater frequency.

Try changing the "Framesize (horiz)" from 832 to 840, see if that makes a difference. You can only change it in steps of eight IIRC.
cheers
tony
AliveMOon
Posts: 3
Joined: Mon Sep 16, 2013 7:44 pm

Re: I try Radeon7000 S-VHS out connect to Neptun Genlock.

Post by AliveMOon »

I tried to set up and down, many setting!
I'm almost gave up when I noticed that the uBoot work without the problem.

That is, the cards can be set up, only Picasso96 dont know setup.
User avatar
tonyw
AmigaOS Core Developer
AmigaOS Core Developer
Posts: 1479
Joined: Wed Mar 09, 2011 1:36 pm
Location: Sydney, Australia

Re: I try Radeon7000 S-VHS out connect to Neptun Genlock.

Post by tonyw »

You have to match the settings of the two video sources so that they are the same in frequency and phase, both vertical and horizontal. Since I don't know what your two sources are, I can't help you except to offer suggestions.

The U-Boot screen is a VESA standard, 800x600. I don't know what scan rates it uses, I've never measured them. You will have to change the settings of the test screen shown so that it generates the same rates. I suggested one change, but you will have to experiment until you get it right.

Sadly, no one uses Genlocks these days. They went out of fashion with analogue televison a couple of decades ago.
cheers
tony
AliveMOon
Posts: 3
Joined: Mon Sep 16, 2013 7:44 pm

Re: I try Radeon7000 S-VHS out connect to Neptun Genlock.

Post by AliveMOon »

We departures on interesting issue because I think beyond their own problem.
If we could find the problem source, many TV output would be useful.
Post Reply