Optical mouse& keyboard problems

This forum is for all AmigaOne 500, Sam440 and Sam460 specific issues.

Optical mouse& keyboard problems

Postby JosDuchIt » Thu Feb 13, 2014 2:22 pm

I did buy an optical mouse & Gigabyte keyboarI.
On my SAM 460ex booting with the optical USB dongle plugged in invariably bring the CLI window up after having opened the AOS4.1 log screen.
I don't seem the only one having these problems: there was a thread about this on Amigans website.

What can i do or hope for?
JosDuchIt
 
Posts: 286
Joined: Sun Jun 26, 2011 6:47 pm

Re: Optical mouse& keyboard problems

Postby javierdlr » Fri Feb 14, 2014 5:24 pm

JosDuchIt wrote:I did buy an optical mouse & Gigabyte keyboarI.
On my SAM 460ex booting with the optical USB dongle plugged in invariably bring the CLI window up after having opened the AOS4.1 log screen.
I don't seem the only one having these problems: there was a thread about this on Amigans website.

What can i do or hope for?


Hi ;-)
Does it happens ALWAYS?
Try disabling USB ohci module (comment out in Kicklayout) if not already done, letting only USB uhci & ehci modules load/start.
With update5, update6? Maybe trying to rvert to a prevous USBxxxxx kicklayout files solves it. If you can, try with Update5.
When you get on the system CLI try to see what DumpDebugBuffer tool outputs or post it here if you can.
User avatar
javierdlr
Beta Tester
Beta Tester
 
Posts: 373
Joined: Sun Jun 19, 2011 11:13 pm
Location: Donostia (GUIPUZCOA) - Spain

Re: Optical mouse& keyboard problems

Postby JosDuchIt » Sat Feb 15, 2014 3:30 pm

@javier
It does not happen always
Pracically always after some crash or freeze (whether you reboot warmor cold)
Rarely when you just reboot Ctl Amiga Amiga

I commented out ohci, and maybe there is some progresbut not much The problem is certainly not gone
Dumpdebugbudffer output when the CLI showed up is below.(ohcicomented out)
Maybe trying to rvert to a prevous USBxxxxx kicklayout files solves it. If you can, try with Update5.


Can you explain which files exactly?


Please note this too:

withou uncommenting i could not boot when an USB stick was pluggd in: the USB stick reading out never stopped.
Now i can boot in some cases but the same problem reappears in other cases, durring "scanning for USB storage devices" boot phase.

w

Hidden Text - Click to Show :
msr = 0x00001030
rtg.library PPC460ex optimizations enabled
RadeonHD (2): Graphics card name is: Radeon HD 6450
RadeonHD (2): Identified the chipset as: CAICOS
RadeonHD (2): If - and only if - your card does not work or does not work optimally
please contact Hans de Ruiter at hans --email-sign-- hdrlab.org.nz to help rectify this.
Use the subject: 0x6779:0x174B:0xE204: <name of board>
and *please* describe the problems you are seeing
in your message.
RadeonHD.chip (0): Object: ID: 310C name: HDMI_TYPE_A type: 3 id: C
RadeonHD.chip (0): Object: ID: 3104 name: DUAL_LINK_DVI_D type: 3 id: 4
RadeonHD.chip (0): Object: ID: 3105 name: VGA type: 3 id: 5
RadeonHD.chip (0):
RadeonHD.chip (0): --------------------------------------
RadeonHD.chip (0): CONNECTOR TABLE:
RadeonHD.chip (0):
RadeonHD.chip (0): Connector[0] HDMI 1:
RadeonHD.chip (0): Type: RHD_CONNECTOR_HDMI_A
RadeonHD.chip (0): DDC bus: RHD I2C line 1
RadeonHD.chip (0): HPD: RHD_HPD_3 (monitor not connected)
RadeonHD.chip (0): Outputs:
RadeonHD.chip (0): Output AtomOutputUniphyD:
RadeonHD.chip (0): Type: RHD_OUTPUT_UNIPHYD
RadeonHD.chip (0): Device Type: atomDFP1
RadeonHD.chip (0): Device Record: Type: atomDFP1, Connector Type: RHD_CONNECTOR_HDMI_A, ConnectorID: 0xC, EncoderID: 0x20
RadeonHD.chip (0):
RadeonHD.chip (0): Connector[1] DVI-D 1:
RadeonHD.chip (0): Type: RHD_CONNECTOR_DVI
RadeonHD.chip (0): DDC bus: RHD I2C line 3
RadeonHD.chip (0): HPD: RHD_HPD_0 (monitor connected)
RadeonHD.chip (0): Outputs:
RadeonHD.chip (0): Output AtomOutputUniphyA:
RadeonHD.chip (0): Type: RHD_OUTPUT_UNIPHYA
RadeonHD.chip (0): Device Type: atomDFP2
RadeonHD.chip (0): Device Record: Type: atomDFP2, Connector Type: RHD_CONNECTOR_DVI, ConnectorID: 0x4, EncoderID: 0x1E
RadeonHD.chip (0):
RadeonHD.chip (0): Connector[2] VGA 1:
RadeonHD.chip (0): Type: RHD_CONNECTOR_VGA
RadeonHD.chip (0): DDC bus: RHD I2C line 0
RadeonHD.chip (0): HPD: RHD_HPD_NONE
RadeonHD.chip (0): Outputs:
RadeonHD.chip (0): Output AtomOutputDACA:
RadeonHD.chip (0): Type: RHD_OUTPUT_DACA
RadeonHD.chip (0): Device Type: atomCRT1
RadeonHD.chip (0): Device Record: Type: atomCRT1, Connector Type: RHD_CONNECTOR_VGA, ConnectorID: 0x5, EncoderID: 0x15
RadeonHD.chip (0):
RadeonHD.chip (0): --------------------------------------
RadeonHD.chip (0):
RadeonHD.chip (0): RadeonHD card successfully opened
Scanning bus 'HDMI 1'
RadeonHD.chip (0): hw_i2c error (2)
RadeonHD.chip (0): hw_i2c error (2)
RadeonHD.chip (0): hw_i2c error (2)
failed.
Scanning bus 'DVI-D 1'
0000: 00 FF FF FF FF FF FF 00 22 F0 36 29 01 01 01 01 ........".6)....
0010: 28 15 01 03 80 30 1B 78 2A 95 25 A1 59 57 9F 27 (....0.x*.%.YW.'
0020: 0D 50 54 A1 08 00 81 C0 81 80 95 00 B3 00 D1 C0 .PT.............
0030: 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C .......:..q8-@X,
0040: 45 00 DC 0C 11 00 00 1E 00 00 00 FD 00 32 4C 18 E............2L.
0050: 5E 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 48 ^..............H
0060: 50 20 32 32 31 31 0A 20 20 20 20 20 00 00 00 FF P.2211..........
0070: 00 43 4E 54 31 34 30 33 32 4E 4A 0A 20 20 00 1D .CNT14032NJ.....
EDID V1.3
ManufacturerID HWP ProductID 2936
SerialNo 16843009 Manufactured week 40 of 2011
Input type digital
Display gamma 2.20
Maximum Image Size 48x27cm
PowerManagement Standby no Suspend no ActiveOff yes
Monitor Name HP 2211
Serial Number CNT14032NJ

Established timings:
800x600@60
640x480@60
720x400@70
1024x768@60

Standard Timing Identification:
1280x720@60hz (16:9)
1280x1024@60hz (5:4)
1440x900@60hz (16:10)
Not Found: 1440x900@60hz (16:10) - calling CVT(RB=1)
1680x1050@60hz (16:10)
Not Found: 1680x1050@60hz (16:10) - calling CVT(RB=1)
1920x1080@60hz (16:9)

Mode 1920x1080@60hz 67khz
DotClock 148500000hz
HTimings 1920 2008 2052 2200
VTimings 1080 1084 1089 1125
Image Size 476x268mm
Flags progressive +hsync +vsync

Monitor Range Limits:
Horizontal frequency 24 - 94khz
Vertical frequency 50 - 76hz
Pixelclock 170Mhz
it8212ide.device 53.15 (19.2.2012)
lsi53c8xx.device 53.15 (19.2.2012)
sam460sata.device 53.15 (19.2.2012)
sii0680ide.device 53.15 (19.2.2012)
sii3112ide.device 53.15 (19.2.2012)
sii3114ide.device 53.15 (19.2.2012)
sii3512ide.device 53.15 (19.2.2012)
JosDuchIt
 
Posts: 286
Joined: Sun Jun 26, 2011 6:47 pm

Re: Optical mouse& keyboard problems

Postby javierdlr » Tue Feb 18, 2014 1:53 am

It does not happen always
Pracically always after some crash or freeze (whether you reboot warmor cold)
Rarely when you just reboot Ctl Amiga Amiga

So, when you cold boot (reset button) sometimes Uboot says/shows only 'USB devices: 1' plugged.
Here happens too sometimes when system has a hard crash/freeze, upon reseting my SAM460ex I only get 'USB devices: 1', have to power off and power on machine and it shows again USB devices: 5'

I commented out ohci, and maybe there is some progresbut not much The problem is certainly not gone
Dumpdebugbudffer output when the CLI showed up is below.(ohcicomented out)

If you use AmiUpdate you can rollback USB, but forget what I said, maybe is causes too much trouble mixing old/new usb libs/modules.

withou uncommenting i could not boot when an USB stick was pluggd in: the USB stick reading out never stopped.
Now i can boot in some cases but the same problem reappears in other cases, durring "scanning for USB storage devices" boot phase.

IIRC it was massstorage problem (solved on latest update).
User avatar
javierdlr
Beta Tester
Beta Tester
 
Posts: 373
Joined: Sun Jun 19, 2011 11:13 pm
Location: Donostia (GUIPUZCOA) - Spain


Return to Platform: AmigaOne 500 and Sam series

Who is online

Users browsing this forum: No registered users and 8 guests