[SAM440ep-Flex] J17 port - SOLVED!!

This forum is for all AmigaOne 500, Sam440 and Sam460 specific issues.
Post Reply
User avatar
AmiSpaTra
Posts: 3
Joined: Tue Jun 21, 2011 7:59 pm
Location: Spain
Contact:

[SAM440ep-Flex] J17 port - SOLVED!!

Post by AmiSpaTra »

I've installed a frontal hub (Digitus DA-70133-2 - VPR3.0). The manufacturer says what this support USB 1.1 and 2.0.

I've plugged into J19A connector and this works,
but with this new AmigaOS 4.1.3 release I've changed to J17 connector (port #5)... however now the hub don't work 8'^(.
I've plugged an USB key and the system don't recognize it (and all leds from the hub continues off). Hints?

Regards
Last edited by AmiSpaTra on Tue Sep 13, 2011 3:06 pm, edited 1 time in total.
Spectre660
Posts: 1525
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: [SAM440ep-Flex] J17 port

Post by Spectre660 »

I observed the same thing with J17. I had disconnected my internal multicard reader a few weeks ago and tried to plug it in on Sunday but nothing worked with J17. The cable is not long enough to connect to J19A so I did not try that at the time. I am now also running Update 3 .

AmiSpaTra wrote:I've installed a frontal hub (Digitus DA-70133-2 - VPR3.0). The manufacturer says what this support USB 1.1 and 2.0.

I've plugged into J19A connector and this works,
but with this new AmigaOS 4.1.3 release I've changed to J17 connector (port #5)... however now the hub don't work 8'^(.
I've plugged an USB key and the system don't recognize it (and all leds from the hub continues off). Hints?

Regards
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
Spectre660
Posts: 1525
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: [SAM440ep-Flex] J17 port

Post by Spectre660 »

Still not working

Guess that we should read the Manual .

System:Documentation/usb/usb_ohci_readme

The OHCI driver supports following UBoot variables:

usb_enable_4x0 - if set to "on" or "1", the ohci interface
of the PPC 440ep or PPC 460ex cpus are activated.
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
User avatar
AmiSpaTra
Posts: 3
Joined: Tue Jun 21, 2011 7:59 pm
Location: Spain
Contact:

Re: [SAM440ep-Flex] J17 port

Post by AmiSpaTra »

You said...
Spectre660 wrote:Guess that we should read the Manual .
You are my hero. SOLVED :D , thanks.
Post Reply