Re: AmigaOS4.1 Update 3 USB Problems
Posted: Fri Jun 08, 2012 9:06 pm
AmigaGTI told me, he uses now a card with NEC Chip, it works. He does not have the card from first post anymore, sorry.
Support Forum
https://forum.hyperion-entertainment.com/
https://forum.hyperion-entertainment.com/viewtopic.php?f=18&t=288
My D-Link Hub is:Can you describe more precisely the configuration that does not work?
What is the model number of the D-Link hub?
I tried the HUB on both the usb port of the sam440ep Mini-Itx. I use the backport as my sam is in a PsileCaseWhich port is the hub plugged into?
Have you tried both ports on the back panel?
Do you mean the internal port of the motherboard? i can try but not immediatly as it is a little bit difficult at the moment but i'll do itHave you tried connecting the hub to one of the motherboard ports?
Yes, i tried the hub on both port and i connected the keyboard to the hub and the mouse on the other port of the sam and I tried also to invert the combination. The problem is that with the hub connected it only works one device per time, so or it works only the mouse or the keyboard but not both on the same time..Have you tried connecting the hub to the keyboard port (the upper port), connecting the keyboard to the hub so that it is there when power comes on, then turning the power off and on again?
I have to try this step.. i'll tell youThe SAM has a "feature" that works like this: If you try to interrupt the boot sequence with the keyboard (to get into U-Boot), it only works the first time you switch the machine on. If you reset the machine (without turning off the power) and try to interrupt the boot sequence again, it won't work. You have to cycle the power to make it work again. Are you sure you are not being tricked by this?