AOS4.1 Final Edition does not start

This forum is for Pegasos II specific issues.
Post Reply
Reth
Beta Tester
Beta Tester
Posts: 47
Joined: Mon Jun 20, 2011 3:44 pm

AOS4.1 Final Edition does not start

Post by Reth »

Hi everybody,

when I try to boot AOS4.1FE from CD Bootloader starts and entire kickstart is loaded. But then nothing else happens anymore AOS4.1FE does not boot further.
Any idea what goes wrong here and what to try?

Many thanks in advance!

Bye
Evillord68
Beta Tester
Beta Tester
Posts: 233
Joined: Sun Jun 19, 2011 5:26 pm

Re: AOS4.1 Final Edition does not start

Post by Evillord68 »

Do you still have this problem?
Which drives are shown in bootmenu?
User avatar
tonyw
AmigaOS Core Developer
AmigaOS Core Developer
Posts: 1479
Joined: Wed Mar 09, 2011 1:36 pm
Location: Sydney, Australia

Re: AOS4.1 Final Edition does not start

Post by tonyw »

As a betatester, you should have a serial terminal connected so that you can capture the serial debug output. With that output, you should be able to see what is going wrong.
cheers
tony
amc
Posts: 3
Joined: Sat Sep 16, 2017 5:59 pm

Re: AOS4.1 Final Edition does not start

Post by amc »

Hello,
I have experienced the same behavior with my Peg2 board. Serial terminal didn't show anything useful to debug, but in my case it depended on Peg2 firmware: I had rev. 1.0, strings colors weren't correctly recognized and booting hung after loading Kickstart in text mode without switching to graphics but upgrading to 1.1 Smartfirmware fixed the issue.

Hope this helps.

Regards
Alessio
Reth
Beta Tester
Beta Tester
Posts: 47
Joined: Mon Jun 20, 2011 3:44 pm

Re: AOS4.1 Final Edition does not start

Post by Reth »

Hi again,

since my safe backup also hung on startup I inserted AOS4.1 FE CD into PegII these days and this time it booted flawlessly so that I was able to install it.
Thank you for your support!

Bye
Post Reply