X1000 boots to black with Radeon R9 270X and 2.7 driver

AmigaOne X1000 platform specific issues.
User avatar
eliyahu
Beta Tester
Beta Tester
Posts: 63
Joined: Fri Jun 17, 2011 11:13 pm

Re: X1000 boots to black with Radeon R9 270X and 2.7 driver

Post by eliyahu »

Epsilon wrote:Quick update - today I have carefully packaged and shipped my X1000 board to AmigaKit to inspect. Hopefully the issue(s) identified are fixable - I look forward to being able to use it again soon.

Has been a week now of not being able to use my X1000 - definitely missing it!
i hope amigakit are able to very quickly identify the issue, quickly repair the board, and quickly ship it back to you at minimal cost. best wishes!

-- eliyahu
OoZic
Posts: 5
Joined: Tue Nov 19, 2013 8:41 am
Location: The Netherlands

Re: X1000 boots to black with Radeon R9 270X and 2.7 driver

Post by OoZic »

Epsilon wrote:Hi All,

Quick update - today I have carefully packaged and shipped my X1000 board to AmigaKit to inspect. Hopefully the issue(s) identified are fixable - I look forward to being able to use it again soon.

Has been a week now of not being able to use my X1000 - definitely missing it!

Catcha,
Epsilon
We are already missing updates on your very appriciated blog ;)
User avatar
Hypex
Beta Tester
Beta Tester
Posts: 645
Joined: Mon Dec 20, 2010 2:23 pm
Location: Vic. Australia.

Re: X1000 boots to black with Radeon R9 270X and 2.7 driver

Post by Hypex »

Epsilon wrote:Has been a week now of not being able to use my X1000 - definitely missing it!
Has it only been that long? Gee it feels much longer since I read about your issues. Well since it was in working order,
User avatar
Epsilon
Beta Tester
Beta Tester
Posts: 30
Joined: Thu May 24, 2012 10:48 am

Re: X1000 boots to black with Radeon R9 270X and 2.7 driver

Post by Epsilon »

Hi All,

Just to close this issue out (I hate leaving things unfinished), the X1000 was sent to the UK in April 2015 and eventually determined by Varisys to have a CPU issue. Because it is surface mounted on the X1000 it is not easily replaceable, with the repair cost approaching the cost of a new board.

I accepted the offer of a new X1000 board at a good price, and I received the new board yesterday (September 7, 2015). After installing it into the old case the X1000 works fine now.

In addition I bought a new Radeon R9 250X card for it from AmigaKit while waiting to get the X1000 back from the UK, and when connected to the new board, Warp3D SI worked perfectly with it - no changes needed.

I see other people are also having issues with the 270X card on their X1000 too. My advice would be to avoid this model card altogether, as Mike and I ultimately did to resolve the problem.

I am glad to have a replacement working X1000 again, and Warp3D working too. As both Mike and myself are up and running now, this issue can be closed out.

Catcha,
Epsilon
User avatar
ssolie
Beta Tester
Beta Tester
Posts: 1010
Joined: Mon Dec 20, 2010 8:51 pm
Location: Canada
Contact:

Re: X1000 boots to black with Radeon R9 270X and 2.7 driver

Post by ssolie »

Epsilon wrote:I see other people are also having issues with the 270X card on their X1000 too. My advice would be to avoid this model card altogether, as Mike and I ultimately did to resolve the problem.
What card(s) exactly are a problem?

I'm asking because I think this is worth adding to the X1000 wiki page
ExecSG Team Lead
User avatar
mbrantley
Beta Tester
Beta Tester
Posts: 90
Joined: Sat Jun 09, 2012 3:49 am
Location: Mobile, Alabama USA

Re: X1000 boots to black with Radeon R9 270X and 2.7 driver

Post by mbrantley »

SSolie, as detailed in this thread the XFX R9 270X was no good for me, so I returned that card for an MSI R9 270 and it worked properly straight away. Also, upon logging in here to post this note, I noticed a PM from another user (from August -- so sorry I didn't see it before now!) telling me he had the black screen problem with an MSI R9 270X. Clearly, the "X" is to be avoided until the compatibility problem can be found and sorted.

I saw a forum post somewhere with someone (sorry I forget where) reporting R9 270X working fine, but I have also seen other threads elsewhere reporting problems with the 270X. I won't buy another one on a bet. Heh.
User avatar
jdupuis
Posts: 223
Joined: Sat May 09, 2015 7:19 am
Location: Baton Rouge, Louisiana USA

Re: X1000 boots to black with Radeon R9 270X and 2.7 driver

Post by jdupuis »

Epsilon wrote:Hi All,

Just to close this issue out (I hate leaving things unfinished), the X1000 was sent to the UK in April 2015 and eventually determined by Varisys to have a CPU issue. Because it is surface mounted on the X1000 it is not easily replaceable, with the repair cost approaching the cost of a new board.

I accepted the offer of a new X1000 board at a good price, and I received the new board yesterday (September 7, 2015). After installing it into the old case the X1000 works fine now.

In addition I bought a new Radeon R9 250X card for it from AmigaKit while waiting to get the X1000 back from the UK, and when connected to the new board, Warp3D SI worked perfectly with it - no changes needed.

I see other people are also having issues with the 270X card on their X1000 too. My advice would be to avoid this model card altogether, as Mike and I ultimately did to resolve the problem.

I am glad to have a replacement working X1000 again, and Warp3D working too. As both Mike and myself are up and running now, this issue can be closed out.

Catcha,
Epsilon

Glad to know you're x1000 is back in business. Looking forward to getting more x1000 stuff on your blog. Been missing it. Welcome back!!

Cheers!
John
C= A500 2 megs RAM with A590 w/40 MB SCSI HD and Workbench 1.3
C= A3000 25 MHz with Workbench 3.1
AmigaOne X1000 4 GB RAM, XFX Radeon HD 6670 1GB GDDR5 GPU and AmigaOS 4.1 FE/Ubuntu 12.04.5 LTS/Ubuntu Mate 16.04 LTS
Sam460ex 2GB DDR2 800 MHz RAM, XFX Radeon HD 5450 2GB GDDR3 GPU, 3114 SATA Raid, ENVY24HT sound card and AmigaOS 4.1 FE
User avatar
ssolie
Beta Tester
Beta Tester
Posts: 1010
Joined: Mon Dec 20, 2010 8:51 pm
Location: Canada
Contact:

Re: X1000 boots to black with Radeon R9 270X and 2.7 driver

Post by ssolie »

mbrantley wrote:SSolie, as detailed in this thread the XFX R9 270X was no good for me, so I returned that card for an MSI R9 270 and it worked properly straight away....
Thanks, I updated the wiki at http://wiki.amigaos.net/wiki/AmigaOne_X1000
ExecSG Team Lead
User avatar
sundown
Beta Tester
Beta Tester
Posts: 465
Joined: Mon Dec 20, 2010 10:38 pm
Location: California, USA

Re: X1000 boots to black with Radeon R9 270X and 2.7 driver

Post by sundown »

You might add that the r9 270 (non-X) works fine in the x1000.
X1000 - Antec Solo case, 4GB DDR2 mem, XFX R9 270 gfx card, Plextor DVD, 2 Samsung 1TB F3 HDD, RTL-8139 network card, Cooler Master Silent Pro 600W PSU
Post Reply