Welcome First Contact customers

AmigaOne X1000 platform specific issues.
User avatar
Slayer
Beta Tester
Beta Tester
Posts: 851
Joined: Tue Dec 21, 2010 4:19 am
Location: New Zealand

Re: Welcome First Contact customers

Post by Slayer »

Welcome aboard lucaricossa

Great Stuff! 8-)
~Yes I am a Kiwi, No, I did not appear as an extra in 'Lord of the Rings'~
1x AmigaOne X5000 2.0GHz 2gM RadeonR9280X AOS4.x
3x AmigaOne X1000 1.8GHz 2gM RadeonHD7970 AOS4.x
User avatar
nbache
Beta Tester
Beta Tester
Posts: 1714
Joined: Mon Dec 20, 2010 7:25 pm
Location: Copenhagen, Denmark
Contact:

Re: Welcome First Contact customers

Post by nbache »

Welcome Luca!

I use AmigaNetFS (found on Aminet) between all my AmigaOS machines, that usually works nicely for transferring files - the advantage over FTP (which Lyle suggests) being that the files keep their timestamps and protection bits.

But if you have really large amounts to transfer, hooking up your drive directly is probably preferable. And yes, both the IDE and the SATA interfaces should be fully compatible with those on your A1. You don't mention whether you SiI card is an IDE (0680) or a SATA (3112/3114/3512) one, but all should be bog standard and let you move the disks over to the X1000.

Best regards,

Niels
User avatar
lucaricossa
Posts: 21
Joined: Mon Jun 20, 2011 1:12 pm
Location: Geneva CH
Contact:

Re: Welcome First Contact customers

Post by lucaricossa »

thank you all. I tried to configure different ftp servers on my A1 and could not acces them from my SAM. Unable to configure the server correctly.
BTW, the Sil is IDE
User avatar
nbache
Beta Tester
Beta Tester
Posts: 1714
Joined: Mon Dec 20, 2010 7:25 pm
Location: Copenhagen, Denmark
Contact:

Re: Welcome First Contact customers

Post by nbache »

lucaricossa wrote:BTW, the Sil is IDE
Right, so all your old disks will be IDE.

They should hook up just fine to the IDE port on the X1000 motherboard, where they will be seen by the sb600ide.device.

Just make sure you set the master/slave jumpers on the drives correctly depending on which of the plugs on the cable each one uses. And do use proper 80-lead PATA cables.

Best regards,

Niels
User avatar
trevordick
A-Eon Technology
A-Eon Technology
Posts: 1385
Joined: Mon Dec 20, 2010 1:28 pm

Re: Welcome First Contact customers

Post by trevordick »

Welcome from me too! :-)

Trevor
I'm just Breezin'
User avatar
Creols
Posts: 118
Joined: Mon Dec 20, 2010 5:57 pm
Location: Courbevoie, France

Re: Welcome First Contact customers

Post by Creols »

Welcome from french X1000 owners ;-)

Content de vous trouver là !

Jacques Vanhove
AmigaOne XE, µA1, Sam 440ep, Sam Flex 800 MHz, Sam 460 ex, X1000 and more...
User avatar
Fernecho
Posts: 31
Joined: Sun Feb 05, 2012 5:54 pm
Location: Ourense - SPAIN

Re: Welcome First Contact customers

Post by Fernecho »

Welcome aboard, you must be the first in Geneva and can be in Switzerland.
Bienvenue à bord, vous devez être le première à Genève et peut être en Suisse.

Regards.
Lisardo R. ( Amiga -NG user forum )
Amiga 1200 / Blizzard 1260 / Mediator 1200 / Voodoo 3000 / 64 Mb / AmigaOS 3.9
Sam Flex 440ep 733 Mhz / AmigaOS 4.1 u 4
AmigaONE X1000
User avatar
lucaricossa
Posts: 21
Joined: Mon Jun 20, 2011 1:12 pm
Location: Geneva CH
Contact:

Re: Welcome First Contact customers

Post by lucaricossa »

Je sais que le patron de RELEC en a un, donc je ne suis pas le premier en Suisse!
User avatar
Fernecho
Posts: 31
Joined: Sun Feb 05, 2012 5:54 pm
Location: Ourense - SPAIN

Re: Welcome First Contact customers

Post by Fernecho »

OK, en tout cas, félicitations pour votre acquisition.
OK, anyway, congratulations on your acquisition.
Amiga 1200 / Blizzard 1260 / Mediator 1200 / Voodoo 3000 / 64 Mb / AmigaOS 3.9
Sam Flex 440ep 733 Mhz / AmigaOS 4.1 u 4
AmigaONE X1000
User avatar
lucaricossa
Posts: 21
Joined: Mon Jun 20, 2011 1:12 pm
Location: Geneva CH
Contact:

Re: Welcome First Contact customers

Post by lucaricossa »

trevordick wrote:Welcome from me too! :-)

Trevor
Thanks (everybody). Btw, I am still unable to log into the secure part of aeon site. What did I miss ?

Luca
Post Reply