Hi all.
I have a problem with Linux on my X1000.
I install Linux (mintppc11/debian) with a netinstall.iso for testung supertuxkart08.
Installation works .
After set the CFE-Variables setenv bootargs "root=/dev/sda4" and boot with boot -elf -noints -nousb -fs=fat cf0:vmlinux-3.5.7 it boots fine into mintppc11.
I must use -nousb ! oterwise i get a Kernelpanic "cannot found a rootfs on unknown0,0..."
In mintppc11 I copy the right Kernel-modules (3.5.7X1000 and 3.5.7-Kernel) to /lib/modules.
1. shutdown on the Desktop (everthing will go fine. Get a Message "its now safe to turn off" and i press the resetbutton on my x1000
2. First Boot with the 3.5.7-Kernelmodules. Also a nice and Fast boot into the Desktop.
2. shutdown same as i do for the 1.shutdown.
3. 2nd. Boot. I get a Message the Displaymanager is notright configured and will be disabled.
So i log into the system as root. When i type aptitude update a message appears "Segmentation fault" and a .so file is not found or has errors.
Whats wrong with my Linux-Installation ? Its the 3.5.7-Kernel ?
Have anybody a 3.5.7-mintppc11 installation that shutdown correctly ?
Liinux Installation on X1000 kills hisself !
Liinux Installation on X1000 kills hisself !
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9
Re: Liinux Installation on X1000 kills hisself !
Yes,
for me, MintPPC 11 (beta 03 from october 2012) shutdowns well.
I have the message "your system is halted, you can power down your computer" or something equivalent.
I had the "cannot found rootfs..." during my first installation attempts because I used a partition number > 6... but not your case.
for me, MintPPC 11 (beta 03 from october 2012) shutdowns well.
I have the message "your system is halted, you can power down your computer" or something equivalent.
I had the "cannot found rootfs..." during my first installation attempts because I used a partition number > 6... but not your case.
http://apps.amistore.net/zTools
X1000 - AmigaOS 4.1.6 / 4.1 FE
X1000 - AmigaOS 4.1.6 / 4.1 FE
Re: Liinux Installation on X1000 kills hisself !
Do you use a CF inside in the X1000 to boot the Kernel ? or boot it with the FFS-Boot-Partition on the HDD.
When i boot with this -> boot -elf -noints -fs=fat cf0:vmlinux-3.5.7 ->Kernel panic cannotn fount rootfs on ..... I think the Kernel-3.5.7 mounts my CF as /dev/sda.
with -nousb i can boot.
Hm have you a link to your Beta3-Installations-CD ?
Is your Linux on the same or on a seperate HD?
When i boot with this -> boot -elf -noints -fs=fat cf0:vmlinux-3.5.7 ->Kernel panic cannotn fount rootfs on ..... I think the Kernel-3.5.7 mounts my CF as /dev/sda.
with -nousb i can boot.
Hm have you a link to your Beta3-Installations-CD ?
Is your Linux on the same or on a seperate HD?
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9
Re: Liinux Installation on X1000 kills hisself !
Yes, I use cf inside my x1000
Here is the beta3 (including netinst that I used)
http://cdimage.debian.org/cdimage/wheez ... pc/iso-cd/
I notice that a new beta 4 is too available.
And, i just have a single HD, therefore Linux is on the same HD than AmigaOS.
Here is the beta3 (including netinst that I used)
http://cdimage.debian.org/cdimage/wheez ... pc/iso-cd/
I notice that a new beta 4 is too available.
And, i just have a single HD, therefore Linux is on the same HD than AmigaOS.
http://apps.amistore.net/zTools
X1000 - AmigaOS 4.1.6 / 4.1 FE
X1000 - AmigaOS 4.1.6 / 4.1 FE
Re: Liinux Installation on X1000 kills hisself !
ty i will try it with beta3. I have used beta4 bevor maybe this was the failure?.
Which Kernel do you use for install and later for booting ? The vmlinux39NH and vmlinux39 Kernel or the new vmlinux-3.5.7 Kernel ?
Which Kernel do you use for install and later for booting ? The vmlinux39NH and vmlinux39 Kernel or the new vmlinux-3.5.7 Kernel ?
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9
Re: Liinux Installation on X1000 kills hisself !
I have used th 3.5.7 for install and everyday use
I boot with these argument on CFE (from printenv)
bootargs = root=/dev/sda4
And the COMMAND is
boot -elf -noints -fatfs cf0:vmlinux-3.5.7
I take the opportunity, I would like to know if it's my low bandwith who make netinstall so long...
How many times spend you to make a netinstall ? Me around 2 hours !
I boot with these argument on CFE (from printenv)
bootargs = root=/dev/sda4
And the COMMAND is
boot -elf -noints -fatfs cf0:vmlinux-3.5.7
I take the opportunity, I would like to know if it's my low bandwith who make netinstall so long...
How many times spend you to make a netinstall ? Me around 2 hours !
http://apps.amistore.net/zTools
X1000 - AmigaOS 4.1.6 / 4.1 FE
X1000 - AmigaOS 4.1.6 / 4.1 FE
Re: Liinux Installation on X1000 kills hisself !
The kernel will not boot at all if it is on a RDSK partitioned disk, This is a know CFE bug.zappa2009 wrote:Do you use a CF inside in the X1000 to boot the Kernel ? or boot it with the FFS-Boot-Partition on the HDD.
The CF card will never be sda. That will always be your main boot disk.When i boot with this -> boot -elf -noints -fs=fat cf0:vmlinux-3.5.7 ->Kernel panic cannotn fount rootfs on ..... I think the Kernel-3.5.7 mounts my CF as /dev/sda.
with -nousb i can boot.
The kernel assigns letters in this order (or does on my machine)
SB600 Sata ports
SB600 IDE port
CF slot
USB media.
I not sure where an additional SATA card would go as I don't have one, but I would expect between the SATA and IDE.
I have no idea why you need -nousb, I never have.
Regards
Darren
Re: Liinux Installation on X1000 kills hisself !
I try 5 CF-Cards for holding Linux-Kernels.
All will be seen bei the 3.5.7-Kernel and in the Boot-output bevor the Kernel-Panic There are Messages of sd.....Transcend....sda1 or sd.... cf 2 sd.....sda1 sda2 sda3
But my internal sata hd are not show with his 5 Partitions.
Can i debug these with a special command?
With the cfe-debug i see with putty only the cfe-messages not the Linux-boot-messages.
then I can post the Kernel-panic
All will be seen bei the 3.5.7-Kernel and in the Boot-output bevor the Kernel-Panic There are Messages of sd.....Transcend....sda1 or sd.... cf 2 sd.....sda1 sda2 sda3
But my internal sata hd are not show with his 5 Partitions.
Can i debug these with a special command?
With the cfe-debug i see with putty only the cfe-messages not the Linux-boot-messages.
then I can post the Kernel-panic
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9
Re: Liinux Installation on X1000 kills hisself !
Zappa2009 :
And for my curiosity
"How many times spend you to make a netinstall ? Me around 2 hours !" ?
And for my curiosity
"How many times spend you to make a netinstall ? Me around 2 hours !" ?
http://apps.amistore.net/zTools
X1000 - AmigaOS 4.1.6 / 4.1 FE
X1000 - AmigaOS 4.1.6 / 4.1 FE
Re: Liinux Installation on X1000 kills hisself !
3h i think.
Download the wheezy-cd1
Copy serverl Kernels and amigaboot to my CF and stick it into my X1000
make some CFE Variabels with bootcommandos for cd install
boot up and copy the Kernel-modules to /lib/modules
restart and need 10 times until i found out i need the " -nousb " Parameter for booting without kernel panic
then i reboot 2 times for testing my install and in the 2,nd reboot -> My MintPPC11 are dead -> seqmentation fault
I am also try to boot the LiveUSB-Linux but i dont know witch boot args does the Stick need. ?
How can i found out witch /dev is the 1st usb-stick usbdisk0 is ?
Download the wheezy-cd1
Copy serverl Kernels and amigaboot to my CF and stick it into my X1000
make some CFE Variabels with bootcommandos for cd install
boot up and copy the Kernel-modules to /lib/modules
restart and need 10 times until i found out i need the " -nousb " Parameter for booting without kernel panic
then i reboot 2 times for testing my install and in the 2,nd reboot -> My MintPPC11 are dead -> seqmentation fault
I am also try to boot the LiveUSB-Linux but i dont know witch boot args does the Stick need. ?
How can i found out witch /dev is the 1st usb-stick usbdisk0 is ?
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9