Hi a Friend of mine gave me a Gift in Form of a Nvidia-QuattroFX 1400 PCI-Express SingelSlot.
Any Change to get it Running with LinuxPPC with Kernel 3.5.7 ?
Not for permanent only temp to make some Tests with Supertuxkart0.8
Or can I use its beside my RadeonHD5450 at the same time in my X1000.
RadeonHD with OS4.1.6 and Nvidia with LinuxPPC ?
Good Idea or Bad Idea ?
Linux 3.5.7 and Nvidia QuatroFX 1400 ?
Linux 3.5.7 and Nvidia QuatroFX 1400 ?
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9
Re: Linux 3.5.7 and Nvidia QuatroFX 1400 ?
Compile a kernel with the nouveau KMS in, either as a module or built in. Pat supplied all the xorg.deivers as I recall. You may need to look up about 2 graphics card setups.zappa2009 wrote:Hi a Friend of mine gave me a Gift in Form of a Nvidia-QuattroFX 1400 PCI-Express SingelSlot.
Any Change to get it Running with LinuxPPC with Kernel 3.5.7 ?
Not for permanent only temp to make some Tests with Supertuxkart0.8
There are a couple of people here who can build you a kernel if it would help.
I'd put the card in slot 3 (see below)
I don't see why not, but may need a bit of setting up.Or can I use its beside my RadeonHD5450 at the same time in my X1000.
Distinctly possible! But I've no experience -you'd be mostly on your own.RadeonHD with OS4.1.6 and Nvidia with LinuxPPC ?
Worth a try I think...Good Idea or Bad Idea ?
Regards
Darren
Re: Linux 3.5.7 and Nvidia QuatroFX 1400 ?
Ok i try it.
I hope it would work
I hope it would work
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9
Re: Linux 3.5.7 and Nvidia QuatroFX 1400 ?
Oh i see Xen074 has build a new Kernel and he will help me with the Nvidea-Nouvau and xHCI .
Sounds cool
Sounds cool
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9
Re: Linux 3.5.7 and Nvidia QuatroFX 1400 ?
Yes that's right. I have finished with building the new kernel. I have compiled the Nvidia driver and USB 3 driver into the kernel. You don't need a new kernel modules directory (/lib/modules/3.8.7X1000)zappa2009 wrote:Oh i see Xen074 has build a new Kernel and he will help me with the Nvidea-Nouvau and xHCI .
Sounds cool
Download: vmlinux-3.8.7x1000-usb3-nouveau.tar.gz
Have a lot of fun with your new kernel.
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Linux 3.5.7 and Nvidia QuatroFX 1400 ?
Thanks Xeno74 !
USB3 works.
But with both Graphics Nvidia and Radeon The Monitor connect on DVI-1 on my Nvidia CFE come not up.
Also no DVI-Output (both DVI-1 and DVI-2) with Nvidea alone. Serial debug at starting and then hangs. I tried both DVI-1 and DVI-2 on the Nvidia.
Connect i the Monotor to back to Radeon -> CFE shows up but no 3D working under Linux. AmigaOS4.1.6 are running fine Ranger see the Nvidea
Hm but it was a try. I stay with my RadeonHD 5450
But anyway USB3 works and this is more important as the old and louder Nvidea
USB3 works.
But with both Graphics Nvidia and Radeon The Monitor connect on DVI-1 on my Nvidia CFE come not up.
Also no DVI-Output (both DVI-1 and DVI-2) with Nvidea alone. Serial debug at starting and then hangs. I tried both DVI-1 and DVI-2 on the Nvidia.
Connect i the Monotor to back to Radeon -> CFE shows up but no 3D working under Linux. AmigaOS4.1.6 are running fine Ranger see the Nvidea
Hm but it was a try. I stay with my RadeonHD 5450
But anyway USB3 works and this is more important as the old and louder Nvidea
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9