I have created a nemo patch file for the new kernel 3.9.
http://paste.ubuntu.com/5623122/
http://pastebin.de/34146
Code: Select all
diff -upr linux-3.9/arch/powerpc/kernel/pci-common.c linux-3.9-nemo/arch/powerpc/kernel/pci-common.c
--- linux-3.9/arch/powerpc/kernel/pci-common.c 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/arch/powerpc/kernel/pci-common.c 2013-05-01 10:26:24.000000000 +0200
@@ -751,6 +751,17 @@ void pci_process_bridge_OF_ranges(struct
isa_io_base =
(unsigned long)hose->io_base_virt;
#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC_PASEMI_SB600
+ /* Workaround for lack of device tree */
+ if (primary) {
+ __ioremap_at(cpu_addr, (void *)ISA_IO_BASE,
+ size, _PAGE_NO_CACHE|_PAGE_GUARDED);
+ hose->io_base_virt = (void *)_IO_BASE;
+ printk("Initialised io_base_virt 0x%lx _IO_BASE 0x%llxn", (unsigned long)hose->io_base_virt, _IO_BASE);
+ }
+#endif
+
/* pci_io_size and io_base_phys always represent IO
* space starting at 0 so we factor in pci_addr
*/
@@ -1216,6 +1227,7 @@ void pcibios_allocate_bus_resources(stru
&ioport_resource : &iomem_resource;
else {
pr = pci_find_parent_resource(bus->self, res);
+#ifndef CONFIG_PPC_PASEMI_SB600
if (pr == res) {
/* this happens when the generic PCI
* code (wrongly) decides that this
@@ -1223,6 +1235,7 @@ void pcibios_allocate_bus_resources(stru
*/
continue;
}
+#endif
}
pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
@@ -1652,7 +1665,9 @@ void pcibios_scan_phb(struct pci_control
pr_debug("PCI: Scanning PHB %sn", of_node_full_name(node));
/* Get some IO space for the new PHB */
+#ifndef CONFIG_PPC_PASEMI_SB600
pcibios_setup_phb_io_space(hose);
+#endif
/* Wire up PHB bus resources */
pcibios_setup_phb_resources(hose, &resources);
diff -upr linux-3.9/arch/powerpc/platforms/pasemi/iommu.c linux-3.9-nemo/arch/powerpc/platforms/pasemi/iommu.c
--- linux-3.9/arch/powerpc/platforms/pasemi/iommu.c 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/arch/powerpc/platforms/pasemi/iommu.c 2013-05-01 10:44:34.000000000 +0200
@@ -1,3 +1,9 @@
+* This is a modified copy of
+* usr/src/linux-2.6.39.4/arch/powerpc/platforms/pasemi/iommu.c
+* The mod is on line 150
+* By Len Karpowicz <twotat2z@embarqmail.com
+*/
+
/*
* Copyright (C) 2005-2008, PA Semi, Inc
*
@@ -139,7 +145,9 @@ static void iommu_table_iobmap_setup(voi
iommu_table_iobmap.it_busno = 0;
iommu_table_iobmap.it_offset = 0;
/* it_size is in number of entries */
- iommu_table_iobmap.it_size = 0x80000000 >> IOBMAP_PAGE_SHIFT;
+/* Note: changed 0x80000000 to 0x7FFFFFFF for SBLive! SB0220 */
+/* out of range problem on X1000 */
+ iommu_table_iobmap.it_size = 0x7FFFFFFF >> IOBMAP_PAGE_SHIFT;
/* Initialize the common IOMMU code */
iommu_table_iobmap.it_base = (unsigned long)iob_l2_base;
diff -upr linux-3.9/arch/powerpc/platforms/pasemi/Kconfig linux-3.9-nemo/arch/powerpc/platforms/pasemi/Kconfig
--- linux-3.9/arch/powerpc/platforms/pasemi/Kconfig 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/arch/powerpc/platforms/pasemi/Kconfig 2013-05-01 10:33:21.000000000 +0200
@@ -13,6 +13,13 @@ config PPC_PASEMI
menu "PA Semi PWRficient options"
depends on PPC_PASEMI
+
+config PPC_PASEMI_SB600
+ bool "Nemo SB600 South Bridge Support"
+ depends on PPC_PASEMI
+ select PPC_I8259
+ help
+ Workarounds for the SB600 South Bridge.
config PPC_PASEMI_IOMMU
bool "PA Semi IOMMU support"
diff -upr linux-3.9/arch/powerpc/platforms/pasemi/pci.c linux-3.9-nemo/arch/powerpc/platforms/pasemi/pci.c
--- linux-3.9/arch/powerpc/platforms/pasemi/pci.c 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/arch/powerpc/platforms/pasemi/pci.c 2013-05-01 11:53:09.000000000 +0200
@@ -106,6 +106,69 @@ static int workaround_5945(struct pci_bu
return 1;
}
+#ifdef CONFIG_PPC_PASEMI_SB600
+static int sb600_bus = 5;
+static void __iomem *iob_mapbase = NULL;
+
+static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val);
+
+static void sb600_set_flag(int bus)
+{
+ struct resource res;
+ struct device_node *dn;
+ struct pci_bus *busp;
+ u32 val;
+ int err;
+
+ if (sb600_bus == -1)
+ {
+ busp = pci_find_bus(0, 0);
+ pa_pxp_read_config(busp, PCI_DEVFN(17,0), PCI_SECONDARY_BUS, 1, &val);
+
+ sb600_bus = val;
+
+ printk(KERN_CRIT "NEMO SB600 on bus %d.n",sb600_bus);
+ }
+
+ if (iob_mapbase == NULL)
+ {
+ dn = of_find_compatible_node(NULL, "io-bridge", "pasemi,1682m-iob");
+ if (!dn)
+ {
+ printk(KERN_CRIT "NEMO SB600 missing iob noden");
+ return;
+ }
+
+ err = of_address_to_resource(dn, 0, &res);
+ of_node_put(dn);
+
+ if (err)
+ {
+ printk(KERN_CRIT "NEMO SB600 missing resourcen");
+ return;
+ }
+
+ printk(KERN_CRIT "NEMO SB600 IOB base %08lxn",res.start);
+
+ iob_mapbase = ioremap(res.start + 0x100, 0x94);
+ }
+
+ if (iob_mapbase != NULL)
+ {
+ if (bus == sb600_bus)
+ {
+ out_le32(iob_mapbase + 4, in_le32(iob_mapbase + 4) | 0x800);
+ }
+ else
+ {
+ out_le32(iob_mapbase + 4, in_le32(iob_mapbase + 4) & ~0x800);
+ }
+ }
+}
+#endif
+
+
static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
@@ -123,6 +186,10 @@ static int pa_pxp_read_config(struct pci
return PCIBIOS_SUCCESSFUL;
addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);
+
+#ifdef CONFIG_PPC_PASEMI_SB600
+ sb600_set_flag(bus->number);
+#endif
/*
* Note: the caller has already checked that offset is
@@ -157,6 +224,10 @@ static int pa_pxp_write_config(struct pc
return PCIBIOS_BAD_REGISTER_NUMBER;
addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);
+
+#ifdef CONFIG_PPC_PASEMI_SB600
+ sb600_set_flag(bus->number);
+#endif
/*
* Note: the caller has already checked that offset is
diff -upr linux-3.9/arch/powerpc/platforms/pasemi/setup.c linux-3.9-nemo/arch/powerpc/platforms/pasemi/setup.c
--- linux-3.9/arch/powerpc/platforms/pasemi/setup.c 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/arch/powerpc/platforms/pasemi/setup.c 2013-05-01 12:10:18.000000000 +0200
@@ -34,6 +34,7 @@
#include <asm/prom.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
+#include <asm/i8259.h>
#include <asm/mpic.h>
#include <asm/smp.h>
#include <asm/time.h>
@@ -183,6 +184,55 @@ static int __init pas_setup_mce_regs(voi
}
machine_device_initcall(pasemi, pas_setup_mce_regs);
+#ifdef CONFIG_PPC_PASEMI_SB600
+static unsigned sb600_irq_to_vector(int irq)
+{
+ switch(irq) {
+ case 3: return 216;
+ case 4: return 217;
+ case 5: return 218;
+ case 6: return 219;
+ case 7: return 220;
+ case 8: return 222;
+ case 9: return 212;
+ case 10: return 213;
+ case 11: return 214;
+ case 12: return 215;
+ case 14: return 221;
+ default: return 0;
+ }
+}
+
+static void sb600_8259_cascade(unsigned int irq, struct irq_data *desc)
+{
+ unsigned int cascade_irq = i8259_irq();
+ unsigned vector = sb600_irq_to_vector(cascade_irq);
+ if (vector > 0)
+ generic_handle_irq(vector);
+ outb(0x20, 0xA0); /* Non-specific EOI */
+ outb(0x20, 0x20); /* Non-specific EOI to cascade */
+ desc->chip->irq_eoi(desc);
+}
+extern void i8259_unmask_irq(struct irq_data *d);
+
+__init void sb600_8259_init(void)
+{
+ int gpio_virq;
+
+ // Connect legacy i8259 controller in SB600
+ printk("Init i8259n");
+ i8259_init(NULL, 0);
+
+ gpio_virq = irq_create_mapping(NULL, 3);
+ irq_set_irq_type(gpio_virq, IRQ_TYPE_LEVEL_HIGH);
+ irq_set_chained_handler(gpio_virq, sb600_8259_cascade);
+ mpic_unmask_irq(irq_get_irq_data(gpio_virq));
+
+ // Initial mapping for RTC
+ irq_create_mapping(NULL, 222);
+}
+#endif
+
static __init void pas_init_IRQ(void)
{
struct device_node *np;
@@ -246,6 +296,12 @@ static __init void pas_init_IRQ(void)
of_node_put(mpic_node);
of_node_put(root);
+
+
+#ifdef CONFIG_PPC_PASEMI_SB600
+ sb600_8259_init();
+#endif
+
}
static void __init pas_progress(char *s, unsigned short hex)
@@ -403,12 +459,38 @@ static struct of_device_id pasemi_bus_id
{},
};
+#ifdef CONFIG_PPC_PASEMI_SB600
+
+/*
+ This should come from OF tree. See sysdev/rtc_cmos_setup for details. Need to get i8259 supported correctly first, so that
+ as the standard support hard-codes IRQ 8.
+ */
+
+
+static struct resource rtc_resource[] = {{
+ .name = "rtc",
+ .start = 0x70,
+ .end = 0x71,
+ .flags = IORESOURCE_IO,
+}, {
+ .name = "rtc",
+ .start = 222,
+ .end = 222,
+ .flags = IORESOURCE_IRQ,
+}};
+
+#endif
+
static int __init pasemi_publish_devices(void)
{
pasemi_pcmcia_init();
/* Publish OF platform devices for SDC and other non-PCI devices */
of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
+
+#ifdef CONFIG_PPC_PASEMI_SB600
+ platform_device_register_simple("rtc_cmos", -1, rtc_resource, 2);
+#endif
return 0;
}
@@ -433,6 +515,14 @@ static int __init pas_probe(void)
return 1;
}
+
+#ifdef CONFIG_PPC_PASEMI_SB600
+static int sb600_pci_probe_mode(struct pci_bus *bus)
+{
+ return PCI_PROBE_DEVTREE;
+}
+#endif
+
define_machine(pasemi) {
.name = "PA Semi PWRficient",
.probe = pas_probe,
@@ -445,4 +535,7 @@ define_machine(pasemi) {
.calibrate_decr = generic_calibrate_decr,
.progress = pas_progress,
.machine_check_exception = pas_machine_check_handler,
+#if 0 // def CONFIG_PPC_PASEMI_SB600
+ .pci_probe_mode = sb600_pci_probe_mode,
+#endif
};
diff -upr linux-3.9/arch/powerpc/sysdev/i8259.c linux-3.9-nemo/arch/powerpc/sysdev/i8259.c
--- linux-3.9/arch/powerpc/sysdev/i8259.c 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/arch/powerpc/sysdev/i8259.c 2013-05-01 12:33:56.000000000 +0200
@@ -6,7 +6,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-#undef DEBUG
+#define DEBUG
#include <linux/init.h>
#include <linux/ioport.h>
@@ -104,11 +104,11 @@ static void i8259_set_irq_mask(int irq_n
outb(cached_21,0x21);
}
-static void i8259_mask_irq(struct irq_data *d)
+void i8259_mask_irq(struct irq_data *d)
{
unsigned long flags;
- pr_debug("i8259_mask_irq(%d)n", d->irq);
+ printk("i8259_mask_irq(%d)n", d->irq);
raw_spin_lock_irqsave(&i8259_lock, flags);
if (d->irq < 8)
@@ -119,11 +119,11 @@ static void i8259_mask_irq(struct irq_da
raw_spin_unlock_irqrestore(&i8259_lock, flags);
}
-static void i8259_unmask_irq(struct irq_data *d)
+void i8259_unmask_irq(struct irq_data *d)
{
unsigned long flags;
- pr_debug("i8259_unmask_irq(%d)n", d->irq);
+ printk("i8259_unmask_irq(%d)n", d->irq);
raw_spin_lock_irqsave(&i8259_lock, flags);
if (d->irq < 8)
@@ -230,6 +230,7 @@ void i8259_init(struct device_node *node
/* initialize the controller */
raw_spin_lock_irqsave(&i8259_lock, flags);
+printk("About to write to i8259n");
/* Mask all first */
outb(0xff, 0xA1);
outb(0xff, 0x21);
@@ -259,15 +260,18 @@ void i8259_init(struct device_node *node
/* Set interrupt masks */
outb(cached_A1, 0xA1);
outb(cached_21, 0x21);
-
+
+ printk("Done write to i8259n");
raw_spin_unlock_irqrestore(&i8259_lock, flags);
+#ifndef CONFIG_PPC_PASEMI_SB600
/* create a legacy host */
i8259_host = irq_domain_add_legacy_isa(node, &i8259_host_ops, NULL);
if (i8259_host == NULL) {
printk(KERN_ERR "i8259: failed to allocate irq host !n");
return;
}
+#endif
/* reserve our resources */
/* XXX should we continue doing that ? it seems to cause problems
diff -upr linux-3.9/arch/powerpc/sysdev/mpic.c linux-3.9-nemo/arch/powerpc/sysdev/mpic.c
--- linux-3.9/arch/powerpc/sysdev/mpic.c 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/arch/powerpc/sysdev/mpic.c 2013-05-01 12:45:04.000000000 +0200
@@ -657,6 +657,56 @@ static inline void mpic_eoi(struct mpic
* Linux descriptor level callbacks
*/
+#ifdef CONFIG_PPC_PASEMI_SB600
+
+static int sb600_vector_to_irq(unsigned vector)
+{
+ switch(vector) {
+ case 212: return 9;
+ case 213: return 10;
+ case 214: return 11;
+ case 215: return 12;
+ case 216: return 3;
+ case 217: return 4;
+ case 218: return 5;
+ case 219: return 6;
+ case 220: return 7;
+ case 221: return 14;
+ case 222: return 8;
+ default: return -1;
+ }
+}
+
+extern void i8259_mask_irq(struct irq_data *d);
+extern void i8259_unmask_irq(struct irq_data *d);
+
+int sb600_unmask_irq(unsigned irq)
+{
+ int vector = sb600_vector_to_irq(irq);
+ if (vector >= 0) {
+ i8259_unmask_irq(irq_get_irq_data(vector));
+ return 1;
+ } else
+ return 0;
+}
+
+int sb600_mask_irq(unsigned irq)
+{
+ int vector = sb600_vector_to_irq(irq);
+ if (vector >= 0) {
+ i8259_mask_irq(irq_get_irq_data(vector));
+ return 1;
+ } else
+ return 0;
+}
+
+int sb600_end_irq(unsigned irq)
+{
+ int vector = sb600_vector_to_irq(irq);
+ return (vector >= 0);
+}
+
+#endif
void mpic_unmask_irq(struct irq_data *d)
{
@@ -664,7 +714,12 @@ void mpic_unmask_irq(struct irq_data *d)
struct mpic *mpic = mpic_from_irq_data(d);
unsigned int src = irqd_to_hwirq(d);
- DBG("%p: %s: enable_irq: %d (src %d)n", mpic, mpic->name, d->irq, src);
+#ifdef CONFIG_PPC_PASEMI_SB600
+ if (sb600_unmask_irq(src))
+ return;
+#endif
+
+ DBG("%p: %s: enable_irq: %d (src %d)n", mpic, mpic->name, irq, src);
mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI),
mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) &
@@ -685,7 +740,12 @@ void mpic_mask_irq(struct irq_data *d)
struct mpic *mpic = mpic_from_irq_data(d);
unsigned int src = irqd_to_hwirq(d);
- DBG("%s: disable_irq: %d (src %d)n", mpic->name, d->irq, src);
+#ifdef CONFIG_PPC_PASEMI_SB600
+ if (sb600_mask_irq(src))
+ return;
+#endif
+
+ DBG("%s: disable_irq: %d (src %d)n", mpic->name, irq, src);
mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI),
mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) |
@@ -704,6 +764,13 @@ void mpic_mask_irq(struct irq_data *d)
void mpic_end_irq(struct irq_data *d)
{
struct mpic *mpic = mpic_from_irq_data(d);
+
+#ifdef CONFIG_PPC_PASEMI_SB600
+ unsigned int src = irqd_to_hwirq(d);
+
+ if (src >= 212 && src <= 222)
+ return;
+#endif
#ifdef DEBUG_IRQ
DBG("%s: end_irq: %dn", mpic->name, d->irq);
diff -upr linux-3.9/drivers/ata/libata-sff.c linux-3.9-nemo/drivers/ata/libata-sff.c
--- linux-3.9/drivers/ata/libata-sff.c 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/drivers/ata/libata-sff.c 2013-05-01 12:48:54.000000000 +0200
@@ -2428,9 +2428,9 @@ int ata_pci_sff_activate_host(struct ata
if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
u8 tmp8, mask;
- /* TODO: What if one channel is in native mode ... */
+ /* Don't look at dummy ports in the mask */
pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
- mask = (1 << 2) | (1 << 0);
+ mask = (! ata_port_is_dummy(host->ports[1]) << 2) | (! ata_port_is_dummy(host->ports[0]) << 0);
if ((tmp8 & mask) != mask)
legacy_mode = 1;
#if defined(CONFIG_NO_ATA_LEGACY)
diff -upr linux-3.9/drivers/ata/pata_atiixp.c linux-3.9-nemo/drivers/ata/pata_atiixp.c
--- linux-3.9/drivers/ata/pata_atiixp.c 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/drivers/ata/pata_atiixp.c 2013-05-01 12:57:15.000000000 +0200
@@ -278,6 +278,11 @@ static int atiixp_init_one(struct pci_de
.port_ops = &atiixp_port_ops
};
const struct ata_port_info *ppi[] = { &info, &info };
+
+#ifdef CONFIG_PPC_PASEMI_SB600
+ // Second port not wired on SB600, and config bit cannot be set by BIOS
+ ppi[1] = &ata_dummy_port_info;
+#endif
return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
ATA_HOST_PARALLEL_SCAN);
diff -upr linux-3.9/drivers/ata/pata_of_platform.c linux-3.9-nemo/drivers/ata/pata_of_platform.c
--- linux-3.9/drivers/ata/pata_of_platform.c 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/drivers/ata/pata_of_platform.c 2013-05-01 16:44:11.000000000 +0200
@@ -42,6 +42,16 @@ static int pata_of_platform_probe(struct
ctl_res = io_res;
ctl_res.start = ctl_res.start+0x3f6;
io_res.end = ctl_res.start-1;
+#ifdef CONFIG_PPC_PASEMI_SB600
+ } else if (of_device_is_compatible(dn, "electra-cf")) {
+ /* Task regs are at 0x800, with alt status @ 0x80e in the primary window
+ * on electra-cf. Adjust ctl_res and io_res accordingly.
+ */
+ ctl_res = io_res;
+ io_res.start += 0x800;
+ ctl_res.start = ctl_res.start + 0x80e;
+ io_res.end = ctl_res.start-1;
+#endif
} else {
ret = of_address_to_resource(dn, 1, &ctl_res);
if (ret) {
@@ -69,6 +79,11 @@ static int pata_of_platform_probe(struct
} else {
dev_info(&ofdev->dev, "pio-mode unspecified, assuming PIO0n");
}
+
+#ifdef CONFIG_PPC_PASEMI_SB600
+ irq_res = 0; // force irq off (doesn't seem to work)
+#endif
+
pio_mask = 1 << pio_mode;
pio_mask |= (1 << pio_mode) - 1;
@@ -80,6 +95,9 @@ static int pata_of_platform_probe(struct
static struct of_device_id pata_of_platform_match[] = {
{ .compatible = "ata-generic", },
{ .compatible = "electra-ide", },
+#ifdef CONFIG_PPC_PASEMI_SB600
+ { .compatible = "electra-cf",},
+#endif
{},
};
MODULE_DEVICE_TABLE(of, pata_of_platform_match);
diff -upr linux-3.9/drivers/gpu/drm/radeon/radeon_pm.c linux-3.9-nemo/drivers/gpu/drm/radeon/radeon_pm.c
--- linux-3.9/drivers/gpu/drm/radeon/radeon_pm.c 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/drivers/gpu/drm/radeon/radeon_pm.c 2013-05-01 13:17:15.000000000 +0200
@@ -214,7 +214,11 @@ static void radeon_set_power_state(struc
/* set memory clock */
if (rdev->asic->pm.set_memory_clock && (mclk != rdev->pm.current_mclk)) {
radeon_pm_debug_check_in_vbl(rdev, false);
+ /* Setting memory clock only works on CAICOS and 6570, don't set for
+ anything else (We ignore 6570 here */
+ if (rdev->family == CHIP_CAICOS) {
radeon_set_memory_clock(rdev, mclk);
+ }
radeon_pm_debug_check_in_vbl(rdev, true);
rdev->pm.current_mclk = mclk;
DRM_DEBUG_DRIVER("Setting: m: %dn", mclk);
@@ -552,7 +556,7 @@ void radeon_pm_resume(struct radeon_devi
SET_VOLTAGE_TYPE_ASIC_VDDCI);
if (rdev->pm.default_sclk)
radeon_set_engine_clock(rdev, rdev->pm.default_sclk);
- if (rdev->pm.default_mclk)
+ if (rdev->pm.default_mclk && (rdev->family == CHIP_CAICOS)) /* Fix for PPC systems HD6000 >6570 */
radeon_set_memory_clock(rdev, rdev->pm.default_mclk);
}
/* asic init will reset the default power state */
@@ -609,7 +613,7 @@ int radeon_pm_init(struct radeon_device
SET_VOLTAGE_TYPE_ASIC_VDDCI);
if (rdev->pm.default_sclk)
radeon_set_engine_clock(rdev, rdev->pm.default_sclk);
- if (rdev->pm.default_mclk)
+ if (rdev->pm.default_mclk && (rdev->family == CHIP_CAICOS)) /* Fix for PPC & > HD6570 */
radeon_set_memory_clock(rdev, rdev->pm.default_mclk);
}
}
diff -upr linux-3.9/drivers/pci/probe.c linux-3.9-nemo/drivers/pci/probe.c
--- linux-3.9/drivers/pci/probe.c 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/drivers/pci/probe.c 2013-05-01 13:24:15.000000000 +0200
@@ -336,7 +336,11 @@ static void pci_read_bridge_io(struct pc
limit |= ((unsigned long) io_limit_hi << 16);
}
- if (base <= limit) {
+ if (base <= limit
+#ifdef CONFIG_PPC_PASEMI_SB600
+ || child->busn_res.start == 5
+#endif
+ ) {
res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
region.start = base;
region.end = limit + io_granularity - 1;
@@ -1405,11 +1409,14 @@ static int only_one_child(struct pci_bus
if (!parent || !pci_is_pcie(parent))
return 0;
+#ifndef CONFIG_PPC_PASEMI_SB600
+ // SB600 has non-zero devices on non-root bus.
if (pci_pcie_type(parent) == PCI_EXP_TYPE_ROOT_PORT)
return 1;
if (pci_pcie_type(parent) == PCI_EXP_TYPE_DOWNSTREAM &&
!pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS))
return 1;
+#endif
return 0;
}
diff -upr linux-3.9/drivers/pcmcia/electra_cf.c linux-3.9-nemo/drivers/pcmcia/electra_cf.c
--- linux-3.9/drivers/pcmcia/electra_cf.c 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/drivers/pcmcia/electra_cf.c 2013-05-01 16:42:00.000000000 +0200
@@ -209,7 +209,7 @@ static int electra_cf_probe(struct platf
cf->ofdev = ofdev;
cf->mem_phys = mem.start;
- cf->mem_size = PAGE_ALIGN(resource_size(&mem));
+ cf->mem_size = PAGE_ALIGN(resource_size(&mem)+0x800);
cf->mem_base = ioremap(cf->mem_phys, cf->mem_size);
cf->io_size = PAGE_ALIGN(resource_size(&io));
diff -upr linux-3.9/drivers/rtc/rtc-cmos.c linux-3.9-nemo/drivers/rtc/rtc-cmos.c
--- linux-3.9/drivers/rtc/rtc-cmos.c 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/drivers/rtc/rtc-cmos.c 2013-05-01 13:33:26.000000000 +0200
@@ -239,6 +239,13 @@ static int cmos_read_alarm(struct device
}
rtc_control = CMOS_READ(RTC_CONTROL);
+
+#ifdef CONFIG_PPC_PASEMI_SB600
+ // Nemo BIOS does not init RTC
+ rtc_control = rtc_control | RTC_24H;
+ CMOS_WRITE(rtc_control, RTC_CONTROL);
+#endif
+
spin_unlock_irq(&rtc_lock);
if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
diff -upr linux-3.9/sound/pci/hda/patch_sigmatel.c linux-3.9-nemo/sound/pci/hda/patch_sigmatel.c
--- linux-3.9/sound/pci/hda/patch_sigmatel.c 2013-04-29 02:36:01.000000000 +0200
+++ linux-3.9-nemo/sound/pci/hda/patch_sigmatel.c 2013-05-01 16:31:05.000000000 +0200
@@ -158,6 +158,7 @@ enum {
STAC_D965_VERBS,
STAC_DELL_3ST,
STAC_DELL_BIOS,
+ STAC_NEMO_DEFAULT,
STAC_DELL_BIOS_SPDIF,
STAC_927X_DELL_DMIC,
STAC_927X_VOLKNOB,
@@ -1358,6 +1359,11 @@ static const struct hda_pintbl oqo9200_p
{}
};
+static const unsigned int nemo_pin_configs[14] = {
+ 0x02214020, 0x02A19080, 0x0181304E, 0x01014010, 0x01A19040, // a b c d e
+ 0x01011012, 0x01016011, 0x01012014, 0x103301F0, 0x00000000, // f g h cd dmic0
+ 0x00000000, 0x01442170, 0x00000000, 0x00000000 // dmic1 digout0 digin pcbeep
+};
static void stac9200_fixup_panasonic(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
@@ -3216,11 +3222,15 @@ static const struct hda_fixup stac927x_f
.type = HDA_FIXUP_PINS,
.v.pins = d965_5st_no_fp_pin_configs,
},
+ [STAC_NEMO_DEFAULT] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = nemo_pin_configs,
+ },
[STAC_DELL_3ST] = {
.type = HDA_FIXUP_PINS,
.v.pins = dell_3st_pin_configs,
.chained = true,
- .chain_id = STAC_927X_DELL_DMIC,
+ .chain_id = STAC_927X_DELL_DMIC,
},
[STAC_DELL_BIOS] = {
.type = HDA_FIXUP_PINS,
@@ -3264,6 +3274,7 @@ static const struct hda_model_fixup stac
{ .id = STAC_D965_5ST_NO_FP, .name = "5stack-no-fp" },
{ .id = STAC_DELL_3ST, .name = "dell-3stack" },
{ .id = STAC_DELL_BIOS, .name = "dell-bios" },
+ { .id = STAC_NEMO_DEFAULT, .name = "nemo-default" },
{ .id = STAC_927X_VOLKNOB, .name = "volknob" },
{}
};
@@ -3301,6 +3312,8 @@ static const struct snd_pci_quirk stac92
"Intel D965", STAC_D965_5ST),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2500,
"Intel D965", STAC_D965_5ST),
+ /* Nemo */
+ SND_PCI_QUIRK(0x1888, 0x1000, "AmigaOne X1000", STAC_NEMO_DEFAULT),
/* volume-knob fixes */
SND_PCI_QUIRK_VENDOR(0x10cf, "FSC", STAC_927X_VOLKNOB),
{} /* terminator */
@@ -4353,6 +4366,7 @@ static const struct hda_codec_preset snd
{ .id = 0x83847683, .name = "STAC9221D A2", .patch = patch_stac922x },
{ .id = 0x83847618, .name = "STAC9227", .patch = patch_stac927x },
{ .id = 0x83847619, .name = "STAC9227", .patch = patch_stac927x },
+ { .id = 0x83847638, .name = "STAC92HD700", .patch = patch_stac927x }
{ .id = 0x83847616, .name = "STAC9228", .patch = patch_stac927x },
{ .id = 0x83847617, .name = "STAC9228", .patch = patch_stac927x },
{ .id = 0x83847614, .name = "STAC9229", .patch = patch_stac927x },