Luigi Burdo was able to start our latest openSUSE Tumbleweed PPC64 img on his AmigaONE X5000.
Further information:
If a program crashes then systemd creates a coredump file. This file is really big. You can remove it in the directory /var/lib/systemd/coredump/. I added Storage=none to the systemd configuration file /etc/systemd/coredump.conf. I hope it disables automatic core dumps.
openSUSE Tumbleweed
Re: openSUSE Tumbleweed
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: openSUSE Tumbleweed
Hi All,
The German magazine Linux Magazin has released S.u.S.E. Linux 4.2 because of the 25th anniversary of Linux. I tested it in a virtual QEMU machine on openSUSE Tumbleweed PowerPC64 today. It boots and works but unfortunately there aren't any XF86 server binaries available (XF86_SVGA, XF86_VGA16 etc). I wanted to test X11 with the virtual Cirrus Logic 5446 graphics card. This graphics card works with my S.u.S.E. Linux 5.0 perfectly.
Screenshot of openSUSE Tumbleweed PPC64 kernel 4.8-rc3 from 2016 and S.u.S.E. Linux 4.2 i686 kernel 1.99.4 from 1996:
Cheers,
Christian
The German magazine Linux Magazin has released S.u.S.E. Linux 4.2 because of the 25th anniversary of Linux. I tested it in a virtual QEMU machine on openSUSE Tumbleweed PowerPC64 today. It boots and works but unfortunately there aren't any XF86 server binaries available (XF86_SVGA, XF86_VGA16 etc). I wanted to test X11 with the virtual Cirrus Logic 5446 graphics card. This graphics card works with my S.u.S.E. Linux 5.0 perfectly.
Screenshot of openSUSE Tumbleweed PPC64 kernel 4.8-rc3 from 2016 and S.u.S.E. Linux 4.2 i686 kernel 1.99.4 from 1996:
Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: openSUSE Tumbleweed
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: openSUSE Tumbleweed
XF86Config S.u.S.E. Linux 5.0 Cirrus Logic GD5446 (QEMU):
Code: Select all
# XF86Config auto-generated by XF86Setup
#
# Copyright (c) 1996 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# See 'man XF86Config' for info on the format of this file
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
EndSection
Section "ServerFlags"
EndSection
Section "Keyboard"
Protocol "Standard"
XkbRules "xfree86"
XkbModel "pc101"
XkbLayout "de"
EndSection
Section "Pointer"
Protocol "PS/2"
Device "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Primary Monitor"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 31.5-57.0
VertRefresh 50-90
Modeline "1280x1024" 80.01 1280 1296 1512 1568 1024 1025 1037 1165 interlace
Modeline "1152x864" 90.00 1152 1216 1472 1680 864 868 876 892 -hsync -vsync
Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
Modeline "800x600" 64.98 800 864 928 1088 600 616 621 657 -hsync -vsync
Modeline "640x480" 36.08 640 696 752 832 480 481 484 509 -hsync -vsync
Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
Modeline "512x384" 25.23 512 528 592 640 384 385 388 404 -hsync -vsync
Modeline "480x300" 31.50 480 504 584 624 300 319 322 333 doublescan
Modeline "400x300" 25.23 400 424 488 520 300 319 322 333 doublescan
Modeline "320x240" 25.23 320 336 384 400 240 244 246 262 doublescan
Modeline "320x200" 25.23 320 336 384 400 200 204 205 225 doublescan
EndSection
Section "Device"
Identifier "Primary Card"
VendorName "Unknown"
BoardName "Cirrus Logic GD544x"
Clocks 25.23 28.32 41.16 36.08 31.50 39.99 45.08 49.87 64.98 72.16 75.00 80.01 85.23 90.00 95.02 100.23 108.03 109.77 120.05 126.00 130.06 135.00
# Use Option "no_bitblt" if you have graphics problems. If that fails
# try Option "noaccel".
# Refer to /usr/X11R6/lib/doc/README.cirrus.
# To allow linear addressing, uncomment the Option line and the
# address that the card maps the framebuffer to.
Option "no_bitblt"
Option "noaccel"
Option "sw_cursor"
EndSection
Section "Screen"
Driver "Accel"
Device "Primary Card"
Monitor "Primary Monitor"
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" "512x384" "480x300" "400x300" "320x240" "320x200"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" "512x384" "480x300" "400x300" "320x240" "320x200"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" "512x384" "480x300" "400x300" "320x240" "320x200"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" "512x384" "480x300" "400x300" "320x240" "320x200"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" "512x384" "480x300" "400x300" "320x240" "320x200"
EndSubSection
EndSection
Section "Screen"
Driver "Mono"
Device "Primary Card"
Monitor "Primary Monitor"
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" "512x384" "480x300" "400x300" "320x240" "320x200"
EndSubSection
EndSection
Section "Screen"
Driver "VGA2"
Device "Primary Card"
Monitor "Primary Monitor"
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" "512x384" "480x300" "400x300" "320x240" "320x200"
EndSubSection
EndSection
Section "Screen"
Driver "VGA16"
Device "Primary Card"
Monitor "Primary Monitor"
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" "512x384" "480x300" "400x300" "320x240" "320x200"
EndSubSection
EndSection
Section "Screen"
Driver "SVGA"
Device "Primary Card"
Monitor "Primary Monitor"
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" "512x384" "480x300" "400x300" "320x240" "320x200"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" "512x384" "480x300" "400x300" "320x240" "320x200"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" "512x384" "480x300" "400x300" "320x240" "320x200"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" "512x384" "480x300" "400x300" "320x240" "320x200"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "640x400" "512x384" "480x300" "400x300" "320x240" "320x200"
EndSubSection
EndSection
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: openSUSE Tumbleweed
Hi All,
I have great news! I was able to download the missing XF86 driver packages for S.u.S.E. Linux 4.2. After that I successfully configured XFree86. I configured the chipset clgd5424 for the virtual Cirrus Logic 5446 graphics card.
XF86Config:
Code: Select all
# File generated by xf86config.
#
# Copyright (c) 1994 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# DontZoom
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "Keyboard"
Protocol "Standard"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Protocol "Xqueue"
AutoRepeat 500 5
# Let the server do the NumLock processing. This should only be required
# when using pre-R6 clients
# ServerNumLock
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1))
# Xleds 1 2 3
# To set the LeftAlt to Meta, RightAlt key to ModeShift,
# RightCtl key to Compose, and ScrollLock key to ModeLock:
# LeftAlt Meta
# RightAlt ModeShift
# RightCtl Compose
# ScrollLock ModeLock
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "Pointer"
Protocol "PS/2"
Device "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Protocol "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice
# BaudRate 9600
# SampleRate 150
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Emulate3Buttons
Emulate3Timeout 50
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 82.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 40-150
# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 602 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Cirrus Logic GD542x"
VendorName "Unknown"
Chipset "clgd5424"
BoardName "Cirrus Logic GD542x"
VideoRam 2048
Clocks 25.23 28.32 41.16 36.08 31.50 39.99 45.08 49.87 64.98 72.16 75.00 80.01 85.23 90.00 95.02 100.23 108.03 109.77 120.05 126.00 130.06 135.00
# Device section for Cirrus Logic GD5420/2/4/6/8/9-based cards.
#MemBase 0x00e00000
#MemBase 0x04e00000
#Option "linear"
Option "no_bitblt"
Option "noaccel"
Option "sw_cursor"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# The Colour SVGA server
Section "Screen"
Driver "svga"
# Use Device "Generic VGA" for Standard VGA 320x200x256
#Device "Generic VGA"
Device "Cirrus Logic GD542x"
Monitor "My Monitor"
Subsection "Display"
Depth 8
Modes "1280x1024"
# ViewPort 0 0
Virtual 1280 1024
EndSubsection
EndSection
# The Mono server
# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64)
Section "Screen"
Driver "accel"
Device "Cirrus Logic GD542x"
Monitor "My Monitor"
Subsection "Display"
Depth 8
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
Virtual 1600 1280
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024"
ViewPort 0 0
Virtual 1600 1280
EndSubsection
Subsection "Display"
Depth 32
Modes "640x480" "800x600" "1024x768"
ViewPort 0 0
Virtual 1152 900
EndSubsection
EndSection
Have a nice week!
Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: openSUSE Tumbleweed
Latest packages for openSUSE Tumbleweed PPC64: http://ftp.opensuse.org/ports/ppc/tumbleweed/repo/oss/
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: openSUSE Tumbleweed
I updated Mesa to version 12.0.3 on openSUSE Tumbleweed PPC64 today.xeno74 wrote:Latest packages for openSUSE Tumbleweed PPC64: http://ftp.opensuse.org/ports/ppc/tumbleweed/repo/oss/
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: openSUSE Tumbleweed
Hi Christian
I have install suse from the img file and boot into xfce.
I have no network and cant find at network configurator.
Do you have an ide to get network op and running ?
Thanks
I have install suse from the img file and boot into xfce.
I have no network and cant find at network configurator.
Do you have an ide to get network op and running ?
Thanks
AmigaX1000
Follow me on twitter @basjoo_dk
Follow me on twitter @basjoo_dk
Re: openSUSE Tumbleweed
You can configure it with YaST.musa wrote:Hi Christian
I have install suse from the img file and boot into xfce.
I have no network and cant find at network configurator.
Do you have an ide to get network op and running ?
Thanks
Menu openSUSE - YaST - System - Network Settings:
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: openSUSE Tumbleweed
Thanks Cristian I am on.xeno74 wrote:
You can configure it with YaST.
Menu openSUSE - YaST - System - Network Settings:
AmigaX1000
Follow me on twitter @basjoo_dk
Follow me on twitter @basjoo_dk