Kernel 4.13

AmigaOne X1000 platform specific issues related to Linux only.

Re: Kernel 4.13

Postby xeno74 » Sat Jul 15, 2017 6:25 am

Hi Tom,

I compiled the alpha9 without the following update.

Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Download: vmlinux-4.13-alpha9-AmigaONE_X1000.tar.gz

Could you please test the alpha9?

Thanks,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
 
Posts: 2933
Joined: Fri Mar 23, 2012 8:58 am

Re: Kernel 4.13

Postby xeno74 » Sat Jul 15, 2017 9:22 am

http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
 
Posts: 2933
Joined: Fri Mar 23, 2012 8:58 am

Re: Kernel 4.13

Postby tbreeden » Sat Jul 15, 2017 8:11 pm

Download: vmlinux-4.13-alpha9-AmigaONE_X1000.tar.gz
Could you please test the alpha9?


alpha9 behaves just as alpha8, ie. Xorg fails and boots into raw terminal screen.

tom
User avatar
tbreeden
 
Posts: 79
Joined: Sat Jun 18, 2011 1:57 am
Location: Charlottesville, VA, USA

Re: Kernel 4.13

Postby xeno74 » Sat Jul 15, 2017 9:06 pm

tbreeden wrote:
alpha9 behaves just as alpha8, ie. Xorg fails and boots into raw terminal screen.

tom


Hi Tom,

Thank you for testing.

Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
 
Posts: 2933
Joined: Fri Mar 23, 2012 8:58 am

Re: Kernel 4.13

Postby xeno74 » Sun Jul 16, 2017 8:40 am

http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
 
Posts: 2933
Joined: Fri Mar 23, 2012 8:58 am

Re: Kernel 4.13

Postby tbreeden » Sun Jul 16, 2017 11:29 pm

Hi Christian,

It seems the problem is gone. Please test the RC1.

Here this makes it a little further, but unfortunately soon comes to a dead stop. :?:

The login GUI screen comes up ok (lightdm I assume), and it seems to have
accepted my password, but about 3 secs later the computer freezes.

The login screen is still there (with the login box gone), but there is no response from moving the
mouse, and any keystrokes I try (Ctrl keys, CtrlAlt, func keys, random keys, etc) don't get a response.

No spontaneous recovery after up to 1/2 hour waiting, so I have to use the reset button on the
X1000 or power it down to recover.

I downloaded the kernel again as well, but same result.

I'm not sure that any log files are recoverable.

Any suggestions for what to do next?
How do I set the system to boot directly into the non-gui raw screen?

Thanks,

Tom
User avatar
tbreeden
 
Posts: 79
Joined: Sat Jun 18, 2011 1:57 am
Location: Charlottesville, VA, USA

Re: Kernel 4.13

Postby xeno74 » Mon Jul 17, 2017 6:36 am

tbreeden wrote:The login GUI screen comes up ok (lightdm I assume), and it seems to have
accepted my password, but about 3 secs later the computer freezes.


Hi Tom,

Thank you for testing. Please boot with the RC1 again. Then boot with with another kernel. (4.9, 4.11, 4.12 etc)
After booting another kernel, please post the output of Xorg.0.log.old.

Code: Select all
cat /var/log/Xorg.0.log.old > Xorg.0.log.old.output


Maybe you can find some error messages in the log file /var/log/syslog.

Thanks in advance,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
 
Posts: 2933
Joined: Fri Mar 23, 2012 8:58 am

Re: Kernel 4.13

Postby tbreeden » Tue Jul 18, 2017 3:52 am

Hi Christian,

Please boot with the RC1 again. Then boot with with another kernel. (4.9, 4.11, 4.12 etc)
After booting another kernel, please post the output of Xorg.0.log.old


Ok, the Xorg.0.log.old is attached below. This matches identically (except for the time stamps
and the "Current Operating System:" line) to the output for the
boot from the 4.11 kernel.

tom


Xorg.0.log
Code: Select all
[    21.901]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    21.901] X Protocol Version 11, Revision 0
[    21.901] Build Operating System: Linux 4.4.0-53-powerpc64-smp ppc Ubuntu
[    21.901] Current Operating System: Linux ubuntu 4.13.0-rc1_A-EON_AmigaOne_X1000_Nemo #1 SMP Sun Jul 16 07:29:26 CEST 2017 ppc64
[    21.901] Kernel command line: root=/dev/sdb5 rw
[    21.901] Build Date: 15 December 2016  12:02:11PM
[    21.901] xorg-server 2:1.18.4-1ubuntu9 (For technical support please see http://www.ubuntu.com/support)
[    21.901] Current version of pixman: 0.34.0
[    21.901]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[    21.901] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.901] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 17 13:28:42 2017
[    21.976] (==) Using config file: "/etc/X11/xorg.conf"
[    21.976] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    22.164] (==) ServerLayout "X.org Configured"
[    22.164] (**) |-->Screen "Screen0" (0)
[    22.164] (**) |   |-->Monitor "Monitor0"
[    22.165] (**) |   |-->Device "Card0"
[    22.165] (**) |-->Input Device "Mouse0"
[    22.165] (**) |-->Input Device "Keyboard0"
[    22.165] (==) Automatically adding devices
[    22.165] (==) Automatically enabling devices
[    22.165] (==) Automatically adding GPU devices
[    22.165] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    22.301] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    22.301]    Entry deleted from font path.
[    22.373] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    22.373]    Entry deleted from font path.
[    22.622] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    22.622]    Entry deleted from font path.
[    22.622] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    22.622]    Entry deleted from font path.
[    22.622] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    22.622]    Entry deleted from font path.
[    22.622] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    22.622]    Entry deleted from font path.
[    22.622] (**) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   built-ins,
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   built-ins
[    22.622] (**) ModulePath set to "/usr/lib/xorg/modules"
[    22.622] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    22.622] (WW) Disabling Mouse0
[    22.622] (WW) Disabling Keyboard0
[    22.693] (II) Loader magic: 0xcd06e8
[    22.693] (II) Module ABI versions:
[    22.693]    X.Org ANSI C Emulation: 0.4
[    22.693]    X.Org Video Driver: 20.0
[    22.693]    X.Org XInput driver : 22.1
[    22.693]    X.Org Server Extension : 9.0
[    22.695] (++) using VT number 7

[    22.695] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    22.697] (II) xfree86: Adding drm device (/dev/dri/card0)
[    22.703] (--) PCI:*(0:1:0:0) 1002:9498:1458:21c5 rev 0, Mem @ 0x90000000/268435456, 0xa0020000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[    22.727] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    22.727] (II) LoadModule: "glx"
[    22.757] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.544] (II) Module glx: vendor="X.Org Foundation"
[    23.544]    compiled for 1.18.4, module version = 1.0.0
[    23.544]    ABI class: X.Org Server Extension, version 9.0
[    23.544] (==) AIGLX enabled
[    23.544] (II) LoadModule: "fbdev"
[    23.580] (WW) Warning, couldn't open module fbdev
[    23.580] (II) UnloadModule: "fbdev"
[    23.580] (II) Unloading fbdev
[    23.580] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    23.580] (==) Matched ati as autoconfigured driver 0
[    23.580] (==) Matched ati as autoconfigured driver 1
[    23.580] (==) Matched modesetting as autoconfigured driver 2
[    23.580] (==) Matched fbdev as autoconfigured driver 3
[    23.580] (==) Assigned the driver to the xf86ConfigLayout
[    23.580] (II) LoadModule: "ati"
[    23.580] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    23.632] (II) Module ati: vendor="X.Org Foundation"
[    23.632]    compiled for 1.18.4, module version = 7.8.0
[    23.632]    Module class: X.Org Video Driver
[    23.632]    ABI class: X.Org Video Driver, version 20.0
[    23.632] (II) LoadModule: "radeon"
[    23.632] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    23.786] (II) Module radeon: vendor="X.Org Foundation"
[    23.786]    compiled for 1.18.4, module version = 7.8.0
[    23.786]    Module class: X.Org Video Driver
[    23.786]    ABI class: X.Org Video Driver, version 20.0
[    23.786] (II) LoadModule: "modesetting"
[    23.786] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    23.833] (II) Module modesetting: vendor="X.Org Foundation"
[    23.833]    compiled for 1.18.4, module version = 1.18.4
[    23.833]    Module class: X.Org Video Driver
[    23.833]    ABI class: X.Org Video Driver, version 20.0
[    23.838] (II) LoadModule: "fbdev"
[    23.838] (WW) Warning, couldn't open module fbdev
[    23.838] (II) UnloadModule: "fbdev"
[    23.838] (II) Unloading fbdev
[    23.838] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    23.839] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
   ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
   ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
   ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
   ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
   ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
   ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
   ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
   ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
   ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
   ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
   ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
   ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
   ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
   ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
   ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
   ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
   ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
   ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
   ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
   ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
   ATI Radeon 9800PRO, ATI Radeon 9800XT,
   ATI Radeon Mobility 9600/9700 (M10/M11),
   ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
   ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
   ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
   ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
   ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
   ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
   ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
   ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
   ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
   ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
   ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
   ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
   ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
   ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
   ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
   ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
   ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
   ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
   ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
   ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
   ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
   ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
   ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
   ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
   ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
   ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
   ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
   ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
   ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
   ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
   ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
   ATI FireGL V3350, ATI Mobility Radeon X1450,
   ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
   ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
   ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
   ATI FireGL V3400, ATI Mobility FireGL V5250,
   ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
   ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
   ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
   ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
   ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
   ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
   ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
   ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
   ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
   ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
   ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
   ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
   AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
   ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
   ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
   ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
   ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
   ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
   ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
   ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
   ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
   ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
   ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
   ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
   ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
   ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
   ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
   ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
   ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
   ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
   ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
   ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
   ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
   ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
   ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
   ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
   ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
   ATI FireGL V3600, ATI Radeon HD 2600 LE,
   ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
   ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
   ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
   ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
   ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
   ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
   ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
   ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
   ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
   ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
   ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
   AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
   AMD Radeon HD 6300 Series Graphics,
   AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
   ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
   AMD Firestream 9350, ATI Radeon HD 5800 Series,
   ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
   ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
   ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
   ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
   REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
   ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
   AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
   AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
   ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
   MULLINS, KAVERI, HAWAII
[    23.847] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    23.994] (II) [KMS] Kernel modesetting enabled.
[    23.994] (WW) Falling back to old probe method for modesetting
[    23.994] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    24.024] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    24.024] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    24.024] (==) RADEON(0): Default visual is TrueColor
[    24.024] (**) RADEON(0): Option "SwapbuffersWait" "0"
[    24.024] (**) RADEON(0): Option "DRI3" "1"
[    24.024] (==) RADEON(0): RGB weight 888
[    24.025] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    24.025] (--) RADEON(0): Chipset: "ATI RV730 PRO [Radeon HD 4650]" (ChipID = 0x9498)
[    24.025] (II) Loading sub module "fb"
[    24.025] (II) LoadModule: "fb"
[    24.025] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.122] (II) Module fb: vendor="X.Org Foundation"
[    24.122]    compiled for 1.18.4, module version = 1.0.0
[    24.122]    ABI class: X.Org ANSI C Emulation, version 0.4
[    24.122] (II) Loading sub module "dri2"
[    24.122] (II) LoadModule: "dri2"
[    24.123] (II) Module "dri2" already built-in
[    24.123] (II) Loading sub module "exa"
[    24.123] (II) LoadModule: "exa"
[    24.123] (II) Loading /usr/lib/xorg/modules/libexa.so
[    24.159] (II) Module exa: vendor="X.Org Foundation"
[    24.159]    compiled for 1.18.4, module version = 2.6.0
[    24.159]    ABI class: X.Org Video Driver, version 20.0
[    24.159] (II) RADEON(0): KMS Color Tiling: enabled
[    24.159] (II) RADEON(0): KMS Color Tiling 2D: enabled
[    24.159] (II) RADEON(0): KMS Pageflipping: enabled
[    24.159] (II) RADEON(0): SwapBuffers wait for vsync: disabled
[    24.161] (II) RADEON(0): Output HDMI-0 using monitor section Monitor0
[    24.169] (II) RADEON(0): Output VGA-0 has no monitor section
[    24.198] (II) RADEON(0): Output DVI-0 has no monitor section
[    24.200] (II) RADEON(0): EDID for output HDMI-0
[    24.316] (II) RADEON(0): EDID for output VGA-0
[    24.345] (II) RADEON(0): EDID for output DVI-0
[    24.345] (II) RADEON(0): Manufacturer: DEL  Model: a07a  Serial#: 842221651
[    24.345] (II) RADEON(0): Year: 2013  Week: 46
[    24.345] (II) RADEON(0): EDID Version: 1.3
[    24.346] (II) RADEON(0): Digital Display Input
[    24.346] (II) RADEON(0): Max Image Size [cm]: horiz.: 52  vert.: 32
[    24.346] (II) RADEON(0): Gamma: 2.20
[    24.346] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[    24.346] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    24.346] (II) RADEON(0): First detailed timing is preferred mode
[    24.346] (II) RADEON(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    24.346] (II) RADEON(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    24.346] (II) RADEON(0): Supported established timings:
[    24.346] (II) RADEON(0): 720x400@70Hz
[    24.346] (II) RADEON(0): 640x480@60Hz
[    24.346] (II) RADEON(0): 800x600@60Hz
[    24.346] (II) RADEON(0): 1024x768@60Hz
[    24.346] (II) RADEON(0): Manufacturer's mask: 0
[    24.346] (II) RADEON(0): Supported standard timings:
[    24.346] (II) RADEON(0): #0: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    24.346] (II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    24.347] (II) RADEON(0): #2: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    24.347] (II) RADEON(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    24.347] (II) RADEON(0): #4: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    24.347] (II) RADEON(0): Supported detailed timing:
[    24.347] (II) RADEON(0): clock: 154.0 MHz   Image Size:  518 x 324 mm
[    24.347] (II) RADEON(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    24.347] (II) RADEON(0): v_active: 1200  v_sync: 1203  v_sync_end 1209 v_blanking: 1235 v_border: 0
[    24.347] (II) RADEON(0): Serial No: YMYH13BC23HS
[    24.347] (II) RADEON(0): Monitor name: DELL U2412M
[    24.347] (II) RADEON(0): Ranges: V min: 50 V max: 61 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    24.347] (II) RADEON(0): EDID (in hex):
[    24.347] (II) RADEON(0):    00ffffffffffff0010ac7aa053483332
[    24.348] (II) RADEON(0):    2e17010380342078eaee95a3544c9926
[    24.348] (II) RADEON(0):    0f5054a1080081408180a940b300d1c0
[    24.348] (II) RADEON(0):    010101010101283c80a070b023403020
[    24.348] (II) RADEON(0):    360006442100001a000000ff00594d59
[    24.348] (II) RADEON(0):    4831334243323348530a000000fc0044
[    24.348] (II) RADEON(0):    454c4c2055323431324d0a20000000fd
[    24.348] (II) RADEON(0):    00323d1e5311000a2020202020200006
[    24.348] (II) RADEON(0): Printing probed modes for output DVI-0
[    24.348] (II) RADEON(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[    24.348] (II) RADEON(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 -hsync -vsync (67.5 kHz e)
[    24.348] (II) RADEON(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    24.348] (II) RADEON(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    24.348] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    24.348] (II) RADEON(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    24.348] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    24.348] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    24.348] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    24.348] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    24.349] (II) RADEON(0): Output HDMI-0 disconnected
[    24.349] (II) RADEON(0): Output VGA-0 disconnected
[    24.349] (II) RADEON(0): Output DVI-0 connected
[    24.349] (II) RADEON(0): Using exact sizes for initial modes
[    24.349] (II) RADEON(0): Output DVI-0 using initial mode 1920x1200 +0+0
[    24.349] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    24.349] (II) RADEON(0): mem size init: gart size :3fdde000 vram size: s:40000000 visible:f3e9000
[    24.349] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    24.349] (==) RADEON(0): DPI set to (96, 96)
[    24.349] (II) Loading sub module "ramdac"
[    24.349] (II) LoadModule: "ramdac"
[    24.349] (II) Module "ramdac" already built-in
[    24.349] (II) UnloadModule: "modesetting"
[    24.349] (II) Unloading modesetting
[    24.349] (--) Depth 24 pixmap format is 32 bpp
[    24.383] (II) RADEON(0): [DRI2] Setup complete
[    24.383] (II) RADEON(0): [DRI2]   DRI driver: r600
[    24.383] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[    24.384] (II) RADEON(0): Front buffer size: 9120K
[    24.384] (II) RADEON(0): VRAM usage limit set to 216550K
[    24.535] (II) RADEON(0): SYNC extension fences enabled
[    24.590] (II) RADEON(0): Present extension enabled
[    24.591] (**) RADEON(0): DRI3 enabled
[    24.591] (==) RADEON(0): Backing store enabled
[    24.591] (II) RADEON(0): Direct rendering enabled
[    24.591] (II) EXA(0): Driver allocated offscreen pixmaps
[    24.591] (II) EXA(0): Driver registered support for the following operations:
[    24.591] (II)         Solid
[    24.591] (II)         Copy
[    24.591] (II)         Composite (RENDER acceleration)
[    24.591] (II)         UploadToScreen
[    24.591] (II)         DownloadFromScreen
[    24.624] (II) RADEON(0): Acceleration enabled
[    24.624] (==) RADEON(0): DPMS enabled
[    24.624] (==) RADEON(0): Silken mouse enabled
[    24.624] (II) RADEON(0): Set up textured video
[    24.624] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    24.624] (II) RADEON(0): [XvMC] Extension initialized.
[    24.624] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    24.645] (--) RandR disabled
[    24.681] (II) SELinux: Disabled on system
[    26.001] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    26.001] (II) AIGLX: enabled GLX_ARB_create_context
[    26.001] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    26.001] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    26.001] (II) AIGLX: enabled GLX_INTEL_swap_event
[    26.001] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    26.001] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    26.001] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    26.001] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    26.001] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    26.001] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    26.006] (II) AIGLX: Loaded and initialized r600
[    26.006] (II) GLX: Initialized DRI2 GL provider for screen 0
[    26.007] (II) RADEON(0): Setting screen physical size to 508 x 317
[    27.340] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event0)
[    27.340] (II) No input driver specified, ignoring this device.
[    27.340] (II) This device may have been added with another device file.
[    27.342] (II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event1)
[    27.342] (**) CHICONY USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    27.342] (**) CHICONY USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    27.342] (II) LoadModule: "libinput"
[    27.342] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    27.626] (II) Module libinput: vendor="X.Org Foundation"
[    27.626]    compiled for 1.18.4, module version = 0.23.0
[    27.626]    Module class: X.Org XInput Driver
[    27.626]    ABI class: X.Org XInput driver, version 22.1
[    27.626] (II) Using input driver 'libinput' for 'CHICONY USB Keyboard'
[    27.626] (**) CHICONY USB Keyboard: always reports core events
[    27.626] (**) Option "Device" "/dev/input/event1"
[    27.631] (**) Option "_source" "server/udev"
[    27.633] (II) input device 'CHICONY USB Keyboard', /dev/input/event1 is tagged by udev as: Keyboard
[    27.633] (II) input device 'CHICONY USB Keyboard', /dev/input/event1 is a keyboard
[    27.645] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:11.0/0000:05:13.0/usb2/2-1/2-1:1.0/0003:04F2:0116.0001/input/input1/event1"
[    27.645] (II) XINPUT: Adding extended input device "CHICONY USB Keyboard" (type: KEYBOARD, id 6)
[    27.645] (**) Option "xkb_model" "pc105"
[    27.645] (**) Option "xkb_layout" "us"
[    27.645] (**) Option "xkb_variant" "nodeadkeys"
[    27.712] (EE) Error loading keymap /var/lib/xkb/server-0.xkm
[    27.712] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[    27.794] (II) input device 'CHICONY USB Keyboard', /dev/input/event1 is tagged by udev as: Keyboard
[    27.794] (II) input device 'CHICONY USB Keyboard', /dev/input/event1 is a keyboard
[    27.796] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[    27.797] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    27.797] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[    27.797] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[    27.797] (**) Logitech USB Receiver: always reports core events
[    27.797] (**) Option "Device" "/dev/input/event2"
[    27.797] (**) Option "_source" "server/udev"
[    27.798] (II) input device 'Logitech USB Receiver', /dev/input/event2 is tagged by udev as: Keyboard
[    27.798] (II) input device 'Logitech USB Receiver', /dev/input/event2 is a keyboard
[    27.808] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:11.0/0000:05:13.1/usb3/3-1/3-1:1.0/0003:046D:C52B.0002/input/input2/event2"
[    27.808] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 7)
[    27.808] (**) Option "xkb_model" "pc105"
[    27.808] (**) Option "xkb_layout" "us"
[    27.808] (**) Option "xkb_variant" "nodeadkeys"
[    27.810] (II) input device 'Logitech USB Receiver', /dev/input/event2 is tagged by udev as: Keyboard
[    27.810] (II) input device 'Logitech USB Receiver', /dev/input/event2 is a keyboard
[    27.812] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[    27.812] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    27.812] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    27.812] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[    27.812] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[    27.812] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[    27.812] (**) Logitech USB Receiver: always reports core events
[    27.812] (**) Option "Device" "/dev/input/event3"
[    27.812] (**) Option "_source" "server/udev"
[    27.814] (II) input device 'Logitech USB Receiver', /dev/input/event3 is tagged by udev as: Keyboard Mouse
[    27.814] (II) input device 'Logitech USB Receiver', /dev/input/event3 is a pointer caps
[    27.814] (II) input device 'Logitech USB Receiver', /dev/input/event3 is a keyboard
[    27.824] (II) libinput: Logitech USB Receiver: needs a virtual subdevice
[    27.824] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:11.0/0000:05:13.1/usb3/3-1/3-1:1.1/0003:046D:C52B.0003/input/input7/event3"
[    27.824] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[    27.824] (**) Option "AccelerationScheme" "none"
[    27.825] (**) Logitech USB Receiver: (accel) selected scheme none/0
[    27.825] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    27.825] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    27.826] (II) input device 'Logitech USB Receiver', /dev/input/event3 is tagged by udev as: Keyboard Mouse
[    27.826] (II) input device 'Logitech USB Receiver', /dev/input/event3 is a pointer caps
[    27.826] (II) input device 'Logitech USB Receiver', /dev/input/event3 is a keyboard
[    27.828] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    27.828] (II) No input driver specified, ignoring this device.
[    27.828] (II) This device may have been added with another device file.
[    27.829] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event10)
[    27.829] (II) No input driver specified, ignoring this device.
[    27.829] (II) This device may have been added with another device file.
[    27.830] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event11)
[    27.830] (II) No input driver specified, ignoring this device.
[    27.830] (II) This device may have been added with another device file.
[    27.831] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event4)
[    27.832] (II) No input driver specified, ignoring this device.
[    27.832] (II) This device may have been added with another device file.
[    27.832] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
[    27.833] (II) No input driver specified, ignoring this device.
[    27.833] (II) This device may have been added with another device file.
[    27.834] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event6)
[    27.834] (II) No input driver specified, ignoring this device.
[    27.834] (II) This device may have been added with another device file.
[    27.835] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event7)
[    27.835] (II) No input driver specified, ignoring this device.
[    27.835] (II) This device may have been added with another device file.
[    27.836] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event8)
[    27.836] (II) No input driver specified, ignoring this device.
[    27.836] (II) This device may have been added with another device file.
[    27.837] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event9)
[    27.837] (II) No input driver specified, ignoring this device.
[    27.837] (II) This device may have been added with another device file.
[    27.852] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    27.852] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    27.852] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[    27.852] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[    27.852] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[    27.853] (**) Logitech USB Receiver: always reports core events
[    27.853] (**) Option "Device" "/dev/input/event3"
[    27.853] (**) Option "_source" "_driver/libinput"
[    27.853] (II) libinput: Logitech USB Receiver: is a virtual subdevice
[    27.853] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:11.0/0000:05:13.1/usb3/3-1/3-1:1.1/0003:046D:C52B.0003/input/input7/event3"
[    27.853] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[    27.853] (**) Option "xkb_model" "pc105"
[    27.853] (**) Option "xkb_layout" "us"
[    27.853] (**) Option "xkb_variant" "nodeadkeys"


extra lines found in successful Xorg.0.log file with 4.11
Code: Select all
[    55.511] (II) RADEON(0): EDID vendor "DEL", prod id 41082
[    55.512] (II) RADEON(0): Using EDID range info for horizontal sync
[    55.512] (II) RADEON(0): Using EDID range info for vertical refresh
[    55.512] (II) RADEON(0): Printing DDC gathered Modelines:
[    55.512] (II) RADEON(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[    55.512] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    55.512] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    55.512] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    55.512] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    55.512] (II) RADEON(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    55.512] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    55.512] (II) RADEON(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    55.512] (II) RADEON(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    55.512] (II) RADEON(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    55.554] (II) RADEON(0): EDID vendor "DEL", prod id 41082
[    55.554] (II) RADEON(0): Using hsync ranges from config file
[    55.554] (II) RADEON(0): Using vrefresh ranges from config file
[    55.554] (II) RADEON(0): Printing DDC gathered Modelines:
[    55.554] (II) RADEON(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[    55.554] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    55.554] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    55.554] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    55.554] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    55.554] (II) RADEON(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    55.554] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    55.554] (II) RADEON(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    55.554] (II) RADEON(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    55.554] (II) RADEON(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    55.648] (II) RADEON(0): EDID vendor "DEL", prod id 41082
[    55.648] (II) RADEON(0): Using hsync ranges from config file
[    55.648] (II) RADEON(0): Using vrefresh ranges from config file
[    55.648] (II) RADEON(0): Printing DDC gathered Modelines:
[    55.648] (II) RADEON(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[    55.648] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    55.648] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    55.648] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    55.648] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    55.648] (II) RADEON(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    55.649] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    55.649] (II) RADEON(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    55.649] (II) RADEON(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    55.649] (II) RADEON(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    55.709] (II) RADEON(0): EDID vendor "DEL", prod id 41082
[    55.709] (II) RADEON(0): Using hsync ranges from config file
[    55.709] (II) RADEON(0): Using vrefresh ranges from config file
[    55.709] (II) RADEON(0): Printing DDC gathered Modelines:
[    55.709] (II) RADEON(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[    55.709] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    55.709] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    55.709] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    55.709] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    55.709] (II) RADEON(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    55.709] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    55.709] (II) RADEON(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    55.709] (II) RADEON(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    55.709] (II) RADEON(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
User avatar
tbreeden
 
Posts: 79
Joined: Sat Jun 18, 2011 1:57 am
Location: Charlottesville, VA, USA

Re: Kernel 4.13

Postby xeno74 » Tue Jul 18, 2017 6:35 am

Hi Tom,

Thank you for posting the Xorg log files. Could you please boot the RC1 without the boot argument 'rw'?

Thanks,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
 
Posts: 2933
Joined: Fri Mar 23, 2012 8:58 am

Re: Kernel 4.13

Postby tbreeden » Wed Jul 19, 2017 3:43 am

Could you please boot the RC1 without the boot argument 'rw'?


Doesn't make any difference => same X.org.log.old file.

Tom
User avatar
tbreeden
 
Posts: 79
Joined: Sat Jun 18, 2011 1:57 am
Location: Charlottesville, VA, USA

PreviousNext

Return to Platform: AmigaOne X1000 - Linux Only

Who is online

Users browsing this forum: No registered users and 2 guests