Page 1 of 21

Sam440ep Linux

Posted: Sat Apr 28, 2012 4:40 pm
by Spectre660
.

Re: Debian Squeeze on Sam440ep-Flex

Posted: Fri Mar 15, 2013 9:29 am
by vox
That is just great, can you please make some step by step manual?

Re: Debian Squeeze on Sam440ep-Flex

Posted: Sat Mar 16, 2013 1:25 am
by Spectre660
.

Re: Debian Squeeze on Sam440ep-Flex

Posted: Fri Aug 02, 2013 7:17 pm
by xeno74
I can host the CD iso. :)

Re: Debian Squeeze on Sam440ep-Flex

Posted: Fri Aug 09, 2013 11:44 am
by Spectre660
.

Re: Debian Squeeze on Sam440ep-Flex

Posted: Fri Aug 09, 2013 2:08 pm
by xeno74
Spectre660 wrote:Thanks.
PM sent.
xeno74 wrote:I can host the CD iso. :)
Thank you!

Here you are: Debian-Linux_Sam440ep_Bussiness_Card_Install.iso
My custom Debian Squeeze Net install CD for Sam440ep-Flex

Have a look at the Acube install file that I have added to the CD about hard disk partitions .
This setup assumes that you are using Acube's parthenepe as the bootloader.
Also after installation and before you start the Linux Gui you need to manually create the following file
and add the following to it or things will be unstable. The fresh installation will boot into Linux
so the edit can be done from the command line before the gui is started.
The install script fails to add it for some reason so you must do it manually.

/etc/modprobe.d/drm-disable

install drm /bin/true
install radeon /bin/true
install agpgart /bin/true

after this is done then the gui can be started by typing startx

Re: Debian Squeeze on Sam440ep-Flex

Posted: Fri Aug 09, 2013 5:02 pm
by Spectre660
.

Re: Debian Squeeze on Sam440ep-Flex

Posted: Fri Aug 09, 2013 5:32 pm
by Belxjander
@Spectre660: Well I hope to get a working system bootstrap working from my own Sam440ep-Flex,

maybe after that I can work up an updated PPC kernel build for the 440

But I am not hopefull of getting a working Linux installed first

Re: Debian Squeeze on Sam440ep-Flex

Posted: Sat Sep 21, 2013 2:09 pm
by Spectre660
.

Re: Debian Squeeze on Sam440ep-Flex

Posted: Sun Sep 22, 2013 1:47 pm
by Spectre660
.