Spectre660's Linux downloads for the Sam440/460

Linux only discussion for the AmigaOne 500 and Sam series
Spectre660
Posts: 1525
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: Spectre660's Linux downloads for the Sam440/460

Post by Spectre660 »

Some current notes for the Sam installers :
The Installation needs to be on the first hard drive.
It will not work on any secondary ones.

Parthenope is the supported boot loader. included on the Sam installer ISO's.(Parthenope is the older version and u2lb is the newer version).usage u2lb for Sam460ex machines and parthenope for Sam440ep machines
This you have to manually install via AmigaOS 4.1 .
Your AmigaOS boot partition must be SFS/00 to boot using Parthenope

The current installers are net installers so no need to remove the Sam boot CD during the installation.
Once the installer is booted the required Linux files are downloaded via your internet connection .

All the Installers will set up the bootstrap ( kernel, menu.lst files and modules etc) on the Linux side properly once the space used for the installation is at the end of the hard drive. This is automatic so no manual command sequence needed.
So leave at least 20Gb of free un partitioned space at the end of the hard drive.

The linux side partitioning is done by the installers also so no need to create the linux partitions from AmigaOS .
Do not leave any additional area in front of this free space un partitioned or the bootstrap installers will not have the correct partition for the bootstrap setup.
So if you want to keep some space for future partitions then create an empty partition in front of the free space.
You may also want to create a small bootable SFS/00 partition of about 2Gb for emergency linux booting in case you have to make changes your current partitions
after you install linux .

Select eth0 for the network interface when prompted for that.

With linux partitioning you get a warning about the partitioner not knowing about the partition type. select yes to continue.
If requested to unmount the hard drive during the installation then select the yes option
Select option use largest continuous hard drive space for the installation.

Current Installers

Debian
http://www.xenosoft.de/Sam460ex_Debian_Jessie-3.iso (Sam460ex only)
http://www.xenosoft.de/Sam_Debian_Jessi ... tall_1.iso
http://www.xenosoft.de/Sam_Debian_Wheezy.iso

Lubuntu
http://www.xenosoft.de/Sam_Lubuntu_15.0 ... tall-1.ISO (Lubuntu 15.04 has wrong colours)
http://www.xenosoft.de/Sam_Lubuntu_14.1 ... tall-1.iso (Lubuntu 14.10 only supported up to Jul 2015)
http://www.xenosoft.de/Sam_Lubuntu_14.0 ... tall-2.iso
Attachments
Parthenope.png
Parthenope
(67.94 KiB) Downloaded 254 times
Empty_Space.png
Free Space on Harddrive
(69.08 KiB) Downloaded 254 times
Last edited by Spectre660 on Fri May 08, 2015 6:39 pm, edited 6 times in total.
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
Spectre660
Posts: 1525
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: Spectre660's Linux downloads for the Sam440/460

Post by Spectre660 »

Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
User avatar
xeno74
Posts: 9349
Joined: Fri Mar 23, 2012 7:58 am

Re: Spectre660's Linux downloads for the Sam440/460

Post by xeno74 »

Spectre660 wrote:Sam440ep Kernel 3.14.0-rc1

https://dl.dropboxusercontent.com/u/542 ... rc1.tar.gz
It works great. Thanks a lot! I've uploaded it. :-)

Download: Sam440ep-3.14.0-rc1.tar.gz :-)
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
vox
Posts: 174
Joined: Thu Jun 23, 2011 2:19 pm
Location: Belgrade Country:Serbia
Contact:

Re: Spectre660's Linux downloads for the Sam440/460

Post by vox »

Spectre660 wrote:Some current notes for the Sam installers :

Parthenope is the supported boot loader. included on the Sam installer ISO's.(Parthenope is the older version and u2lb is the newer version).usage u2lb for Sam460ex machines and parthenope for Sam440ep machines
This you have to manually install via AmigaOS 4.1 .
Your AmigaOS boot partition must be SFS/00 to boot using Parthenope
Thanks for detailed gude. I am preparing my SAM460 for Linux and AOS4 so it comes in proper time.

Again, I need good Uboot manual for SAM460ex, I propose Fedora 20.1 MATE PPC 32/64 as next to do magic (or XFCE/LXDE one?)

I wish all Amigans do your level of hardwork and magic!
Spectre660
Posts: 1525
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: Spectre660's Linux downloads for the Sam440/460

Post by Spectre660 »

Thank you.
xeno74 wrote:
Spectre660 wrote:Sam440ep Kernel 3.14.0-rc1

https://dl.dropboxusercontent.com/u/542 ... rc1.tar.gz
It works great. Thanks a lot! I've uploaded it. :-)

Download: Sam440ep-3.14.0-rc1.tar.gz :-)
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
Belxjander
Posts: 314
Joined: Mon May 14, 2012 10:26 pm
Location: 日本千葉県松戸市 / Matsudo City, Chiba, Japan
Contact:

Re: Spectre660's Linux downloads for the Sam440/460

Post by Belxjander »

Is it possible to insert an emergency bootstrap and rootfs partitions between existing partitions even when MediaToolbox refuses to actively create a new partition in the space set aside ?
Spectre660
Posts: 1525
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: Spectre660's Linux downloads for the Sam440/460

Post by Spectre660 »

Select your empty space in Media toolbox and click on Add partition.
For the Emergency boot partition add 87,363 to the Lower cyl value and type the result into the Higher cyl box.
You can do the same thing for the extra rootfs partition but using a higher number eg 835,204 for a 19GB partition.
Whatever free space is left will be used for Linux by the Linux installer

Belxjander wrote:Is it possible to insert an emergency bootstrap and rootfs partitions between existing partitions even when MediaToolbox refuses to actively create a new partition in the space set aside ?
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
Belxjander
Posts: 314
Joined: Mon May 14, 2012 10:26 pm
Location: 日本千葉県松戸市 / Matsudo City, Chiba, Japan
Contact:

Re: Spectre660's Linux downloads for the Sam440/460

Post by Belxjander »

The only issue I currently have is MediaToolbox is currently refusing to create a new partition *between* two existing partitions,

I am currently considering building a Linux bootstrap USB stick but even with this I would require at least one partition on the primary HDD for a rootfs which leads me back to having a gap between two existing partitions that I want to reuse for Linux.

Has anyone else run into MediaToolbox permitting deletions but refusing to create new partitions?
Can it not insert partitions when modifying the RDB?

As I was directed to retry the "add" button within MediaToolbox I will record a video and link that here.

Then if anyone can explain the refusal to create a new partition or give me an alternative option?
Spectre660 wrote:Select your empty space in Media toolbox and click on Add partition.
For the Emergency boot partition add 87,363 to the Lower cyl value and type the result into the Higher cyl box.
You can do the same thing for the extra rootfs partition but using a higher number eg 835,204 for a 19GB partition.
Whatever free space is left will be used for Linux by the Linux installer
Belxjander wrote:Is it possible to insert an emergency bootstrap and rootfs partitions between existing partitions even when MediaToolbox refuses to actively create a new partition in the space set aside ?
Spectre660
Posts: 1525
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: Spectre660's Linux downloads for the Sam440/460

Post by Spectre660 »

Media toolbox issue was reported in this thread,
http://forum.hyperion-entertainment.biz ... =14&t=2049
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
Spectre660
Posts: 1525
Joined: Sat Jun 18, 2011 2:16 pm
Location: Montserrat

Re: Spectre660's Linux downloads for the Sam440/460

Post by Spectre660 »

Updated Sam440ep Debian Wheezy net Installer.
3.13.1-2 Kernel .

Temporary download link

https://dl.dropboxusercontent.com/u/542 ... tall-3.iso
Sam460ex : Radeon Rx550 Single slot Video Card : SIL3112 SATA card
Post Reply