Now that I have my X5000, which doesn't show the kind of screen the SAM does while booting, I have started to think about setting up Linux on it, and I had to find out how to get at Uboot, so I did and poked around in there a while, but didn't think I had actually changed anything.
Well! Now when I boot, after the "X" of "X5000" gets tased by the Amiga ball 10 times, I get a white screen with something like "<Booting Linux>" across the top. That's kind of silly, because there is no Linux on the machine to boot. I think it's Ctrl-C that gets me out of there to a menu with the option to boot OS4 at the top. But then I get text across the top of the screen telling me (if I could read that fast) what's going on, until finally up comes Workbench. I would guess I must have somehow messed up a boot command, most likely one of these?
Code: Select all
amigaboot_quiet=Y
amigabootmenu_default=2
bdev=sda3
bootargs=root=/dev/sda2 mem=3500M console=ttyS0,115200 console=tty0
bootargs_live=root=/dev/ramdisk boot=casper mem=3500M ro --
bootargs_live_debug=root=/dev/ramdisk boot=casper mem=3500M ro break debug
bootcmd=setenv bootargs root=/dev/$bdev rw console=$consoledev,$baud
Code: Select all
linuxboot=echo Running Linux
Incidentally, I thought I used to know how to set Uboot command variable from Workbench, but to my surprise there is no such thing as "nvsetvar."
Here's another question, although I don't see that it necessarily means a problem. A little after I booted Workbench this time, I got this notification:
Code: Select all
N: [10/16/2017 - 1:47 PM] sys/usbhub|USB hub notification|Unable to reset hub port. Device adding aborted.
Code: Select all
I: [13:11:47] hub.usbfd | HUB | Device found on port 1 of hub "Rear Roothub (ehci.usbhcd/0)".
I: [13:11:47] hub.usbfd | HUB | Device found on port 1 of hub "Front Roothub (ehci.usbhcd/1)".
I: [13:11:48] hub.usbfd | Hub port | Device at port 1 of hub "Rear Roothub (ehci.usbhcd/0)" is high-speed.
I: [13:11:48] hub.usbfd | Hub port | Device at port 1 of hub "Front Roothub (ehci.usbhcd/1)" is high-speed.
I: [13:11:48] USB stack | New Fkt | Fkt 0x6FA24010 at level 1
I: [13:11:48] USB stack | New Fkt | HCD failed to add/create Fkt
W: [13:11:48] hub.usbfd | HUB | Retrying attachment on port 1 of hub "Rear Roothub (ehci.usbhcd/0)"
(previous attempt failed with error -19)
I: [13:11:48] USB stack | New Fkt | Fkt 0x6FA24010 at level 1
I: [13:11:48] USB stack | New Fkt | HCD failed to add/create Fkt
W: [13:11:48] hub.usbfd | HUB | Retrying attachment on port 1 of hub "Front Roothub (ehci.usbhcd/1)"
(previous attempt failed with error -19)