CD/DVD burning

AmigaOne X5000 platform specific issues.

CD/DVD burning

Postby Steff » Thu Jun 28, 2018 11:28 pm

When i try to "backup" my system to CD or DVD, there is an error from AmiDVD which says: Error opening 'L:slb_v2' : object not found. I have looked everywhere, even on my Boot-USB but to no avail. Any ideas anyone?
Steff
 
Posts: 26
Joined: Sun Jun 24, 2018 4:37 pm

Re: CD/DVD burning

Postby ZeroG » Sun Jul 01, 2018 7:59 am

I'm not sure if the X5000 even needs a SLB but if it does you can get a copy of the installed SLB with MediaToolbox.
- start SYS:System/MediaToolbox
- select your Harddrive
- click Edit RDB
- there is a box labeled "AmigaOne bootcode (SLB)" and in it is a "save to file" button
User avatar
ZeroG
 
Posts: 118
Joined: Sat Jun 18, 2011 12:31 pm
Location: Germany

Re: CD/DVD burning

Postby Steff » Sun Jul 01, 2018 6:17 pm

ZeroG wrote:I'm not sure if the X5000 even needs a SLB but if it does you can get a copy of the installed SLB with MediaToolbox.
- start SYS:System/MediaToolbox
- select your Harddrive
- click Edit RDB
- there is a box labeled "AmigaOne bootcode (SLB)" and in it is a "save to file" button


Danke mein Freund

I shall take a peek ;)
Steff
 
Posts: 26
Joined: Sun Jun 24, 2018 4:37 pm

Re: CD/DVD burning

Postby smf » Mon Jul 02, 2018 3:30 pm

ZeroG wrote:I'm not sure if the X5000 even needs a SLB but if it does you can get a copy of the installed SLB with MediaToolbox.


The X5k does not use SLB.
smf
Beta Tester
Beta Tester
 
Posts: 100
Joined: Fri Nov 18, 2011 12:16 am

Re: CD/DVD burning

Postby xenic » Mon Jul 02, 2018 4:38 pm

Steff wrote:
- there is a box labeled "AmigaOne bootcode (SLB)" and in it is a "save to file" button


Danke mein Freund

I shall take a peek ;)

The "save to file" button next to "AmigaOne bootcode (SLB)" is disabled because (as SMF stated) there is no SLB (slb_v2) for the X5000. I think the "Install" button should have been disabled too; you don't want to press that button on an X5000.
AmigaOne X1000 with 2GB memory - OS4.1 FE
xenic
 
Posts: 1145
Joined: Sun Jun 19, 2011 1:06 am

Re: CD/DVD burning

Postby Steff » Sat Jul 14, 2018 2:13 pm

Ok. I have tried all work arounds here but nothing is working. The CD/DVD rom is not recognised in the system as a blank medium. Secondly, the error output is:

SCSI command 00 00 00 00 00 00 failed, err=-3
SCSI command 00 00 00 00 00 00 failed, err=-3
SCSI command 00 00 00 00 00 00 failed, err=-3
SCSI command 00 00 00 00 00 00 failed, err=-3
SCSI command 00 00 00 00 00 00 failed, err=-3

etc, and that is all that happens.

Any ideas anyone?
Steff
 
Posts: 26
Joined: Sun Jun 24, 2018 4:37 pm

Re: CD/DVD burning

Postby Raziel » Sat Jul 14, 2018 6:17 pm

If i might take a guess i'd say AmiDVD wasn' updated to work with the new hardware X5000.

I remember this SCSI command error bug from when i switched to the X1000 and i think i remember there was an update to the program to get rid of it.

So, you might be out of luck, or you could try "FryingPan" ( a little tedious to set up nowadays)
If slaughterhouses had glass walls, everyone would be a vegetarian. ~ Sir Paul McCartney
-
Did everything just taste purple for a second? ~ Philip J. Fry
-
Ain't got no cash, ain't got no style, ladies vomit when I smile. ~ Dr. John Zoidberg
User avatar
Raziel
 
Posts: 810
Joined: Sat Jun 18, 2011 5:00 pm
Location: A haunted Castle somewhere in the Bavarian Mountains

Re: CD/DVD burning

Postby nbache » Sat Jul 14, 2018 11:05 pm

Which version of AmiDVD is it? IIRC, only the one in the Enhancer Pack supports the X5000.

Best regards,

Niels
User avatar
nbache
Beta Tester
Beta Tester
 
Posts: 1274
Joined: Mon Dec 20, 2010 8:25 pm
Location: Copenhagen, Denmark

Re: CD/DVD burning

Postby Steff » Sun Jul 15, 2018 12:38 am

nbache wrote:Which version of AmiDVD is it? IIRC, only the one in the Enhancer Pack supports the X5000.

Best regards,

Niels


Hello Niels.

Some more error messages when starting the AmiDVD:

SCSI command 46 00 00 00 00 00 00 10 00 00 failed
sense: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00
SCSI command 5a 00 2a 00 00 00 00 00 64 00 failed
sense: 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00


And the version you asked for is: RAWBinfo 53.19 (9.3.2014)
Copyright (C) 2000-2012 Hyperion Entertainment CVBA


Most frustrating !!
Steff
 
Posts: 26
Joined: Sun Jun 24, 2018 4:37 pm

Re: CD/DVD burning

Postby trixie » Sun Jul 15, 2018 1:09 am

@Steff

That, however, is the version of RAWBInfo (the component that displays program information in Workbench), not of AmiDVD. You need to click on the Version button in the Workbench Information window to retrieve the version. Or open Shell, go to the AmiDVD directory, and type "version AmiDVD".
Smoke me a kipper, I'll be back for breakfast!

AmigaOne X5000 @ 2GHz / 4GB RAM / Radeon R5 230 / ESI Juli@ / AmigaOS 4.1 Final Edition
SAM440ep-flex @ 667MHz / 1GB RAM / Radeon 9250 / AmigaOS 4.1 Final Edition
User avatar
trixie
 
Posts: 373
Joined: Thu Jun 30, 2011 3:54 pm
Location: Czech Republic

Next

Return to Platform: AmigaOne X5000

Who is online

Users browsing this forum: No registered users and 2 guests