Hi Roland,
Could you please test the RC7 of kernel 4.12?
Download: uImage-4.12-rc7-AmigaONE_X5000.tar.gz
Good luck and thanks in advance,
Christian
(X)(L)ubuntu (MATE) 17.04 Zesty Zapus
Re: (X)(L)ubuntu (MATE) 17.04 Zesty Zapus
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: (X)(L)ubuntu (MATE) 17.04 Zesty Zapus
I did now test it... It seems to boot normally, but has unfortunately no effect on the screen problem I have with Mate 17.04. With Ubuntu 16.04 it works ok.
BTW, by time to time, the desktop menu and toolbar at the bottom of screen just dissappear when using Ubuntu 16.04 (happened also when testing this 4.12-rc7). Is there a keyboard command which can toggle them on/off and which I just succeed to press accidently, or is there possbily a bug which causes this...?
- Roland -
Re: (X)(L)ubuntu (MATE) 17.04 Zesty Zapus
Roland,
Please delete the line SwapBuffersWait in the xorg.conf and try it again.
Thanks,
Christian
Please delete the line SwapBuffersWait in the xorg.conf and try it again.
Thanks,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: (X)(L)ubuntu (MATE) 17.04 Zesty Zapus
Additionally please try the boot argument radeon.dpm=0.
-- Christian
-- Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: (X)(L)ubuntu (MATE) 17.04 Zesty Zapus
Tested both of them, but no effect :-/xeno74 wrote: Please delete the line SwapBuffersWait in the xorg.conf and try it again.
Additionally please try the boot argument radeon.dpm=0.
- Roland -
Re: (X)(L)ubuntu (MATE) 17.04 Zesty Zapus
I finally got around to installing the RC7 version. I am running it with the latest 4.12 kernel that Sinan made.
Works very
Still no 3D acceleration on my Radeon 270X but that was to be expected. Right? I am using the fbdev driver in xorg.conf
I now have sound (I think it is the kernel) .
One question: I used dd to copy the img to a partition as advised. Took a while but works fine. However I would like to know how to reclaim the rest of the space on the partition. I remember @Xeno writing somewhere that you can use Gparted for that.
Here is my Gparted as it looks now.
Thank you Xeno!!
Now it is only 3D that is missing.
Works very
Still no 3D acceleration on my Radeon 270X but that was to be expected. Right? I am using the fbdev driver in xorg.conf
I now have sound (I think it is the kernel) .
One question: I used dd to copy the img to a partition as advised. Took a while but works fine. However I would like to know how to reclaim the rest of the space on the partition. I remember @Xeno writing somewhere that you can use Gparted for that.
Here is my Gparted as it looks now.
Thank you Xeno!!
Now it is only 3D that is missing.
X5000
Re: (X)(L)ubuntu (MATE) 17.04 Zesty Zapus
There is a trick for that. Please decrease the partition sdb3 a little bit with GParted. After that you can increase the partition sdb3 till the next partition.JohnFante wrote:I remember @Xeno writing somewhere that you can use Gparted for that.
Here is my Gparted as it looks now.
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: (X)(L)ubuntu (MATE) 17.04 Zesty Zapus
Thank you. Could not decrease but increasing a couple of MB did the trick .xeno74 wrote: There is a trick for that. Please decrease the partition sdb3 a little bit with GParted. After that you can increase the partition sdb3 till the next partition.
X5000
Re: (X)(L)ubuntu (MATE) 17.04 Zesty Zapus
Fantastic.JohnFante wrote:Thank you. Could not decrease but increasing a couple of MB did the trick .xeno74 wrote: There is a trick for that. Please decrease the partition sdb3 a little bit with GParted. After that you can increase the partition sdb3 till the next partition.
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: (X)(L)ubuntu (MATE) 17.04 Zesty Zapus
Hi All,
If you want to use the MATE PowerPC Remix 2017 with the kernel 4.13 then please install the old Mesa version 17.0.1.
Download: Mesa-17.0.1-MATE_PowerPC_Remix_2017.tar.bz2
Installation instructions:
Please boot the MATE PowerPC Remix 2017 with an older kernel like 4.9, 4.10, 4.11, or 4.12. After that, please install the Mesa version 17.0.1 with the following commands.
Afterwards, please reboot your X5000 with the kernel 4.13.
Cheers,
Christian
If you want to use the MATE PowerPC Remix 2017 with the kernel 4.13 then please install the old Mesa version 17.0.1.
Download: Mesa-17.0.1-MATE_PowerPC_Remix_2017.tar.bz2
Installation instructions:
Please boot the MATE PowerPC Remix 2017 with an older kernel like 4.9, 4.10, 4.11, or 4.12. After that, please install the Mesa version 17.0.1 with the following commands.
Code: Select all
sudo dpkg -i libgl1-mesa-dri_17.0.1-1ubuntu1_powerpc.deb
Code: Select all
sudo dpkg -i libgl1-mesa-glx_17.0.1-1ubuntu1_powerpc.deb
Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.