Page 2 of 4
Re: openSUSE Tumbleweed
Posted: Thu Dec 14, 2017 8:09 am
by acefnq
Many thanks for testing openSUSE!
Did you copy the openSUSE image to a partition or did you install it with the official installation program?
Cheers,
Christian[/quote]
I installed using your second image. I then updated the network settings, installed lightdm (I can't remember how but do remember there was a trick or 2), updated repositories and all worked. I am just about to boot into it again and continue tinkering, I think there is updates happening fairly frequently, will check.
allan
Re: openSUSE Tumbleweed
Posted: Thu May 23, 2019 2:19 pm
by xeno74
Hi All,
I was able to upgrade openSUSE Tumbleweed today. Before I had to modify the URLs of the repositories. I changed the protocol to 'https' except the packman repository. You can modify the repository URLs with YaST2 (Command yast as root - Software - Software Repositories - Select the repository - Edit - (x) Edit Complete URL - Change the protocol of the URL to https - [OK].
Code: Select all
https://download.opensuse.org/ports/ppc/tumbleweed/repo/oss
https://download.opensuse.org/ports/ppc/tumbleweed/repo/non-oss
https://download.opensuse.org/ports/ppc/tumbleweed/repo/debug
http://packman.inode.at/suse/openSUSE_Tumbleweed
(dist-upgrade)
Unfortunately I get some kernel panics (wicedd Not tainted 5.2.0-rc1 .....). I will test more.
Cheers,
Christian
Re: openSUSE Tumbleweed
Posted: Thu May 23, 2019 3:52 pm
by xeno74
I deleted the systemd links to wicedd and after that it works including network.
openSUSE Tumbleweed
20190521 PPC64 on an AmigaOne X1000:
Re: openSUSE Tumbleweed
Posted: Fri May 24, 2019 10:52 am
by xeno74
Hi All,
I installed the NetworkManager with "zypper install NetworkManager" and after that I configured the network device with YaST2 and the NetworkManager. Additionally I installed LightDM. I will upload a new image.
Cheers,
Christian
Re: openSUSE Tumbleweed
Posted: Fri May 24, 2019 4:21 pm
by xeno74
Hi all,
I created with
dd an img of my openSUSE Tumbleweed
20190521 PPC64 installation today.
Be aware, that openSUSE is experimental and isn't supported. openSUSE for the X1000 and X5000 is alpha software! It's only for testing and tinkering!
Download:
openSUSE_Tumbleweed_20190521_ppc64.img.tar.gz
Users:
root (password "amigaone")
amigaone (password "amigaone")
Screenshot:
Cheers,
Christian
Re: openSUSE Tumbleweed
Posted: Sat May 25, 2019 6:18 am
by xeno74
Hi All,
Please note: Hardware 3D acceleration doesn't work with the Radeon HD7xxx series and above (Radeon SI). You need a Radeon HD6xxx series or below.
If you have a Radeon HD7xxx or above (Radeon SI) installed in your X1000 and X5000, then please prevent the libglamor module from loading. It is loaded if a Radeon HD7xxx or above card is detected and causes xorg to crash.
Code: Select all
sudo mv /usr/lib64/xorg/modules/libglamoregl.so /usr/lib64/xorg/modules/libglamoregl.so.bak
Thanks,
Christian
Re: openSUSE Tumbleweed
Posted: Tue May 28, 2019 8:57 am
by xeno74
Hi All,
Currently you can't
reboot and
power-off your AmigaOne from the display manager (LightDM) and from the desktop (MATE, XFCE ...).
I have a solution.
Please open the Polkit configuration file "
/etc/polkit-1/rules.d/90-default-privs.rules" as root (su).
Change the
reboot and
power-off entries of
org.freedesktop.login1 from
Code: Select all
[ 'auth_admin_keep', 'auth_admin_keep', 'auth_admin_keep' ],
to
I changed the following entries:
Code: Select all
'org.freedesktop.login1.power-off':
[ 'yes', 'yes', 'yes' ],
Code: Select all
'org.freedesktop.login1.power-off-multiple-sessions':
[ 'yes', 'yes', 'yes' ],
Code: Select all
'org.freedesktop.login1.reboot':
[ 'yes', 'yes', 'yes' ],
Code: Select all
'org.freedesktop.login1.reboot-multiple-sessions':
[ 'yes', 'yes', 'yes' ],
Cheers,
Christian
Re: openSUSE Tumbleweed
Posted: Fri Jun 28, 2019 7:56 am
by xeno74
Hi All,
I released a
new image of
openSUSE Tumbleweed 20190521 for the X5000 and X1000 today.
New:
- Renamed the libglamoregl.so to libglamoregl.so.bak for using openSUSE Tumbleweed 20190521-2 PPC64 with Radeon SI graphics cards
- The issue with "reboot" and "poweroff" has been fixed through configuring /etc/polkit-1/rules.d/90-default-privs.rules
- MATE desktop added (version 1.22.1)
- Mesa updated to version 19.0.5
- Samba AD-DC 4.10.2 added
Download:
openSUSE_Tumbleweed_20190521-2_ppc64.img.tar.gz (3.5GB)
md5sum for the tar.gz:
a81b03ef98f5e4bc11ffaa864b630028
md5sum for the uncompressed img:
9bf6cc871f6e7f793d06572c642fbf63
Users:
root (password "amigaone")
amigaone (password "amigaone")
Screenshot of openSUSE Tumbleweed 20190521-2 PPC64 with MATE 1.22.1:
Cheers,
Christian
Re: openSUSE Tumbleweed
Posted: Wed Jul 10, 2019 7:44 pm
by Roland
I tested this new Tumbleweed image. Initial phases of booting work ok, but after login, loading lightdm gives just a black screen and a blinking cursor...
Re: openSUSE Tumbleweed
Posted: Wed Jul 10, 2019 11:27 pm
by xeno74
Roland wrote:
I tested this new Tumbleweed image. Initial phases of booting work ok, but after login, loading lightdm gives just a black screen and a blinking cursor...
Which graphics card is installed in your X5000? Did you update openSUSE?
- Christian