Re: Kernel 4.15
Posted: Tue Jan 16, 2018 6:16 am
Support Forum
https://forum.hyperion-entertainment.com/
https://forum.hyperion-entertainment.com/viewtopic.php?f=58&t=3892
Hi All,Madalin-cristian Bucur wrote: The PAMU related errors may be relevant to the issue, if you have incorrect
settings you may have no traffic passing through. The PAMU configuration
should be made by the bootloader. Can you try to disable CONFIG_FSL_PAMU?
Madalin
As far as the dmesg output, it appears cleaner now;Skateman wrote: A workaround to keep the nic alive a bit longer.... is the following command
ip link set eth0 qlen 10000
Code: Select all
[ 0.000000] OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd
[ 0.000000] OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr
[ 0.000000] OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr
[ 0.053008] fsl-pci ffe200000.pcie: PCI host bridge to bus 0000:00
[ 0.056385] fsl-pci ffe201000.pcie: PCI host bridge to bus 1000:00
[ 0.080433] fsl-of-rio ffe0c0000.rapidio: Of-device full name /rapidio@ffe0c0000
[ 0.080442] fsl-of-rio ffe0c0000.rapidio: Regs: [mem 0xffe0c0000-0xffe0d0fff]
[ 0.080454] fsl-of-rio ffe0c0000.rapidio: No valid fsl,srio-rmu-handle property
[ 0.080470] fsl-of-rio: probe of ffe0c0000.rapidio failed with error -2
[ 0.230143] fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28
[ 0.230184] fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29
[ 0.230222] fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30
[ 0.230260] fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31
[ 0.230485] fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32
[ 0.230523] fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33
[ 0.230563] fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34
[ 0.230601] fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35
[ 4.709339] fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
[ 4.709734] scsi host4: sata_fsl
[ 4.709989] fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
[ 4.710369] scsi host5: sata_fsl
[ 4.711608] fsl_espi ffe110000.spi: at 0x (ptrval) (irq = 53)
[ 4.739590] fsl_dpaa_mac ffe4e6000.ethernet: FMan dTSEC version: 0x08240101
[ 4.743879] fsl_dpaa_mac ffe4e6000.ethernet: FMan MAC address: 00:80:10:11:11:11
[ 4.748136] fsl_dpaa_mac ffe4e8000.ethernet: FMan dTSEC version: 0x08240101
[ 4.752461] fsl_dpaa_mac ffe4e8000.ethernet: FMan MAC address: 00:80:10:22:22:22
[ 4.756674] fsl_dpaa_mac ffe4e0000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e0000) failed
[ 4.760954] fsl_dpaa_mac: probe of ffe4e0000.ethernet failed with error -22
[ 4.765324] fsl_dpaa_mac ffe4e2000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e2000) failed
[ 4.769799] fsl_dpaa_mac: probe of ffe4e2000.ethernet failed with error -22
[ 4.774277] fsl_dpaa_mac ffe4e4000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@e4000) failed
[ 4.778897] fsl_dpaa_mac: probe of ffe4e4000.ethernet failed with error -22
[ 4.783587] fsl_dpaa_mac ffe4f0000.ethernet: of_get_mac_address(/soc@ffe000000/fman@400000/ethernet@f0000) failed
[ 4.788414] fsl_dpaa_mac: probe of ffe4f0000.ethernet failed with error -22
[ 4.795390] fsl_dpaa_mac ffe4e6000.ethernet eth0: Probed interface eth0
[ 4.802355] fsl_dpaa_mac ffe4e8000.ethernet eth1: Probed interface eth1
[ 4.870506] ehci-fsl: Freescale EHCI Host controller driver
[ 4.896374] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[ 4.901654] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[ 4.916527] fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000
[ 4.927829] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[ 4.954474] usb usb1: SerialNumber: fsl-ehci.0
[ 4.970693] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[ 4.976117] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
[ 4.991216] fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000
[ 5.002827] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[ 5.040763] usb usb2: SerialNumber: fsl-ehci.1
[ 5.314826] usb 1-1: new high-speed USB device number 2 using fsl-ehci
[ 5.347646] fsl-hv: no hypervisor found
[ 5.385831] usb 2-1: new high-speed USB device number 2 using fsl-ehci
[ 5.852850] usb 2-1.4: new high-speed USB device number 3 using fsl-ehci
[ 5.978071] usb 1-1.1: new low-speed USB device number 3 using fsl-ehci
[ 6.109571] input: CHICONY USB Keyboard as /devices/platform/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:04F2:0116.0001/input/input1
[ 6.167144] hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-fsl-ehci.0-1.1/input0
[ 6.248828] usb 1-1.3: new low-speed USB device number 4 using fsl-ehci
[ 6.355611] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C050.0002/input/input2
[ 6.355781] hid-generic 0003:046D:C050.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-fsl-ehci.0-1.3/input0
[ 55.555491] [c0000001ffbcfbc0] [c00000000002c8b4] .fsl_error_int_handler+0xac/0xf4
Code: Select all
ls -l /sys/devices/system/cpu/vulnerabilities/
I think we need a kernel with a more stable driver... there is a lot of patching going on regarding this NIC driver.xeno74 wrote:Hi Jamie,
Many thanks for your effort. If you need a new kernel for testing please let me know.
Cheers,
Christian
Hi Skateman,Skateman wrote:root@X5000LNX:/home/skateman# ls -l /sys/devices/system/cpu/vulnerabilities/
ls: cannot access '/sys/devices/system/cpu/vulnerabilities/': No such file or directory
Checked for a Vulnerabilities folder... but does not exists