AmigaOne X5000 - FreeBSD Only
Re: AmigaOne X5000 - FreeBSD Only
Yep
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Re: AmigaOne X5000 - FreeBSD Only
Did it boot at all, and fail to attach the ethernet controller? I've been running FreeBSD on my X5000 for 6 months without any major issues. One thing to note, if the ethernet controller is just failing, the device tree may need updated. The device tree included with Linux is incomplete/incorrect, as the X5000 PHYs are attached via RGMII, not TBI. I have a device tree that works, at https://people.freebsd.org/~jhibbits/cy ... _amiga.dts , that you will need to compile with: dtc -I dts -O dtb -s 65536 -o cyrus_p5020_amiga.dtb cyrus_p5020_amiga.dts . The "-s 65536" is important, so that there's enough room for uboot fixups.Skateman wrote:Like mentioned in the FreeBSD readme i have adjusted the setenv loadaddr from 1000000 to 0x3ffffc0
Ubuntu booted and all functional. The DPAA network issues still appear. To bad..
I will revert the the setenv loadaddr 0x3ffffc0 to 1000000
It was worth the try
If you have a good device tree, or your kernel just isn't booting at all (gets stuck before even printing the Copyright message) you may need to recompile your dtb file to grow it, as mentioned above.
Re: AmigaOne X5000 - FreeBSD Only
Hi All,
Here you are:
Download: cyrus_p5020_x5000.dtb
Compiled with the command:
Download: cyrus_p5020_x5000-2.dtb
Compiled with the command:
Download: cyrus_p5020_x5000-3.dtb
Compiled with the command:
Please test them.
Thanks,
Christian
Here you are:
Download: cyrus_p5020_x5000.dtb
Compiled with the command:
Code: Select all
dtc -I dts -O dtb -S 65536 -o cyrus_p5020_x5000.dtb cyrus_p5020_amiga.dts
Compiled with the command:
Code: Select all
dtc -I dts -O dtb -S 131072 -o cyrus_p5020_x5000-2.dtb cyrus_p5020_amiga.dts
Compiled with the command:
Code: Select all
make CROSS_COMPILE=powerpc-linux-gnu- ARCH=powerpc cyrus_p5020.dtb
Code: Select all
cp arch/powerpc/boot/cyrus_p5020.dtb ../cyrus_p5020_x5000-3.dtb
Thanks,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: AmigaOne X5000 - FreeBSD Only
@Xeno74
Just replacing the new Blob for the one i am using now does not solve the DPAA network issues.
I have tried all three but not luck yet.
I will spend some more time on this later.
Thanks
Just replacing the new Blob for the one i am using now does not solve the DPAA network issues.
I have tried all three but not luck yet.
I will spend some more time on this later.
Thanks
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Re: AmigaOne X5000 - FreeBSD Only
Thank you for testing. Were you able to boot the X5000 with all three blobs?Skateman wrote:@Xeno74
Just replacing the new Blob for the one i am using now does not solve the DPAA network issues.
I have tried all three but not luck yet.
I will spend some more time on this later.
Thanks
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: AmigaOne X5000 - FreeBSD Only
Yeah the X5000 booted without problems with all blobs
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Re: AmigaOne X5000 - FreeBSD Only
I've had a look at this (yuk, it'd be a lot easier to read if you used symbols for phandles) and the changes seem to be the same as the ones we tried last year/earlier this year.chmeee wrote:Did it boot at all, and fail to attach the ethernet controller? I've been running FreeBSD on my X5000 for 6 months without any major issues. One thing to note, if the ethernet controller is just failing, the device tree may need updated. The device tree included with Linux is incomplete/incorrect, as the X5000 PHYs are attached via RGMII, not TBI. I have a device tree that works, at https://people.freebsd.org/~jhibbits/cy ... _amiga.dts , that you will need to compile with: dtc -I dts -O dtb -s 65536 -o cyrus_p5020_amiga.dtb cyrus_p5020_amiga.dts . The "-s 65536" is important, so that there's enough room for uboot fixups.Skateman wrote:Like mentioned in the FreeBSD readme i have adjusted the setenv loadaddr from 1000000 to 0x3ffffc0
Ubuntu booted and all functional. The DPAA network issues still appear. To bad..
I will revert the the setenv loadaddr 0x3ffffc0 to 1000000
It was worth the try
If you have a good device tree, or your kernel just isn't booting at all (gets stuck before even printing the Copyright message) you may need to recompile your dtb file to grow it, as mentioned above.
We've had the ethernet running with kernels derived from NXP's SDK, but not from main line. Where have you got your driver from? Can you try one of our hacked dtb files and see if it boots OK on FreeBSD? If it does we know we need to hassle the NXP guys to get it fixed. They think it could be an iommu config error in our firmware, which I assume would also break your driver.
Can you try the one here, seems to be the best option.
http://forum.hyperion-entertainment.biz ... =58&t=3945
Thanks
Darren
Re: AmigaOne X5000 - FreeBSD Only
Sorry for the 4 month delay, been busy with a Talos and Tabor.daz wrote: I've had a look at this (yuk, it'd be a lot easier to read if you used symbols for phandles) and the changes seem to be the same as the ones we tried last year/earlier this year.
We've had the ethernet running with kernels derived from NXP's SDK, but not from main line. Where have you got your driver from? Can you try one of our hacked dtb files and see if it boots OK on FreeBSD? If it does we know we need to hassle the NXP guys to get it fixed. They think it could be an iommu config error in our firmware, which I assume would also break your driver.
Can you try the one here, seems to be the best option.
http://forum.hyperion-entertainment.biz ... =58&t=3945
Thanks
Darren
I'll try your config soon, but wanted to respond to your 'yuk' comment: The dts was generated as a dump from my X5000's uboot (fdt print /, or similar), post-'fdt boardsetup', so all the phandles have been mangled, then fixed up by me. It was most certainly not a manual creation.
- Justin
Re: AmigaOne X5000 - FreeBSD Only
Hi Justin,
Thanks for your reply! I compiled your dts file 4 months ago. Unfortunately the problem still exists with the DPAA network. Do you have another hint for us? Maybe you could compile your dts file for us again. We would be happy to test it.
Thanks,
Christian
Thanks for your reply! I compiled your dts file 4 months ago. Unfortunately the problem still exists with the DPAA network. Do you have another hint for us? Maybe you could compile your dts file for us again. We would be happy to test it.
Thanks,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: AmigaOne X5000 - FreeBSD Only
Hi Christian,xeno74 wrote:Hi Justin,
Thanks for your reply! I compiled your dts file 4 months ago. Unfortunately the problem still exists with the DPAA network. Do you have another hint for us? Maybe you could compile your dts file for us again. We would be happy to test it.
Thanks,
Christian
I just booted with your dtb. There was one change I needed to make with it: Yours is missing a /chosen node. FreeBSD needs a /chosen node with stdin and stdout properties. I also needed to make a change to FreeBSD, which I'll commit tonight.
My /chosen node looks like:
Code: Select all
chosen {
stdin = "serial0";
stdout = "serial0";
};