MPlayer on X1000 - Use Generic or Altivec? Play AVIs?

AmigaOne X1000 platform specific issues.

MPlayer on X1000 - Use Generic or Altivec? Play AVIs?

Postby amigasociety » Sat May 19, 2012 12:17 am

I downloaded and installed MPlayer 1.0 11.11.2010 on my X1000 and see 2 options, a Generic or Altivec. Both launch but wondered which one I should be running on my X1000?

Does this version supposed to play AVIs? When I attempt it on either version I hear a quick blurp of sound and nothing happens after that.

I don't have access to more AVI files but maybe it is a AVI issue? It plays fine on my Mac so.

tj
Happy owner of several Amiga systems including:

AmigaOne X1000
SAM 440ep based Relec The Red One
Amiga A4000T
Amiga A1000
Amiga CD32
User avatar
amigasociety
 
Posts: 146
Joined: Thu Feb 02, 2012 7:09 pm
Location: Northern California

Re: MPlayer on X1000 - Use Generic or Altivec? Play AVIs?

Postby sundown » Sat May 19, 2012 2:22 am

The older mplayers were rather buggy, but use the Altivec version.
A better player is mui-mplayer (muimplayer.lha) on OS4 Depot. That version requires the video to be set to cga_wpa on the x1000, the audio is set for ahi.
AVI's play just fine, I have many. :-)

Ken
X1000 - Antec Solo case, 4GB DDR2 mem, Sapphire HD-4850 gfx card, Plextor DVD, 2 Samsung 1TB F3 HDD, 1 seagate 400Mb IDE HDD, RTL-8139 network card, Rosewill 701 audio card, Cooler Master Silent Pro 600W PSU
User avatar
sundown
Beta Tester
Beta Tester
 
Posts: 319
Joined: Mon Dec 20, 2010 10:38 pm
Location: California, USA

Re: MPlayer on X1000 - Use Generic or Altivec? Play AVIs?

Postby Hans » Sat May 19, 2012 2:27 am

amigasociety wrote:I downloaded and installed MPlayer 1.0 11.11.2010 on my X1000 and see 2 options, a Generic or Altivec. Both launch but wondered which one I should be running on my X1000?


Use the altivec version. The PA6T CPU in your A1-X1000 has an altivec unit, which is a Single Instruction Multiple Data (SIMD) processing unit. It's the PowerPC equivalent of MMX, SSE, and newer variants. Basically, it can perform operations on vectors of numbers simultaneously instead of one number at a time. Needless to say, this is faster (when used properly).

Does this version supposed to play AVIs? When I attempt it on either version I hear a quick blurp of sound and nothing happens after that.

I don't have access to more AVI files but maybe it is a AVI issue? It plays fine on my Mac so.

It's supposed to be able to play AVIs. However, I use DvPlayer (the full version), so I haven't tried MPlayer in a while.

Hans
http://hdrlab.org.nz/ - Amiga OS 4 projects, programming articles and more. Home of the RadeonHD driver for Amiga OS 4.x project.
User avatar
Hans
AmigaOS Core Developer
AmigaOS Core Developer
 
Posts: 478
Joined: Tue Dec 21, 2010 9:25 pm
Location: New Zealand

Re: MPlayer on X1000 - Use Generic or Altivec? Play AVIs?

Postby Slayer » Sat May 19, 2012 4:01 am

Hans wrote:However, I use DvPlayer (the full version), so I haven't tried MPlayer in a while.


I personally use DvPlayer too and do hope Stephen continues with a newer release, I for one will be more than happy to pay another registration fee, great program!
~Yes I am a Kiwi, No, I did not appear as an extra in 'Lord of the Rings'~
2x X1000 1.8GHz 2gM RadeonHD7970 AOS4.x
3x Sam Flex (667MHz, 733MHz & 800MHz models) 1gM Radeon9250 AOS4.x
Sam 667MHz .5gM RadeonM9 AOS4.x
A4000D 604e 233Mhz .125gM Voodoo3 AOS4.x
User avatar
Slayer
Beta Tester
Beta Tester
 
Posts: 701
Joined: Tue Dec 21, 2010 4:19 am
Location: New Zealand

Re: MPlayer on X1000 - Use Generic or Altivec? Play AVIs?

Postby Epsilon » Sat May 26, 2012 10:22 am

sundown wrote:The older mplayers were rather buggy, but use the Altivec version.
A better player is mui-mplayer (muimplayer.lha) on OS4 Depot. That version requires the video to be set to cga_wpa on the x1000, the audio is set for ahi.
AVI's play just fine, I have many. :-)

Ken



Yes, I discovered the gotcha with the video - I couldn't work out why playback of video didn't work on mui-mplayer on the X1000...finally I googled a forum which spelt out the need to change the video type to cga_wpa in the settings of mplayer. Then it worked great. Perhaps there should be something in the readme for this as it would have saved a lot of time fumbling around in the settings!

I did note that playback of DVD content and standard definition avi, divx, xvid, mp4, etc, content was fine, but playback of HD content doesn't work well at all - basically unwatchable. I assume this is a limitation of the mplayer software rather than the X1000 speed?

Catcha,
Epsilon
User avatar
Epsilon
 
Posts: 8
Joined: Thu May 24, 2012 10:48 am

Re: MPlayer on X1000 - Use Generic or Altivec? Play AVIs?

Postby trevordick » Sat May 26, 2012 12:25 pm

Epsilon wrote:
sundown wrote:The older mplayers were rather buggy, but use the Altivec version.
A better player is mui-mplayer (muimplayer.lha) on OS4 Depot. That version requires the video to be set to cga_wpa on the x1000, the audio is set for ahi.
AVI's play just fine, I have many. :-)

Ken



Yes, I discovered the gotcha with the video - I couldn't work out why playback of video didn't work on mui-mplayer on the X1000...finally I googled a forum which spelt out the need to change the video type to cga_wpa in the settings of mplayer. Then it worked great. Perhaps there should be something in the readme for this as it would have saved a lot of time fumbling around in the settings!

I did note that playback of DVD content and standard definition avi, divx, xvid, mp4, etc, content was fine, but playback of HD content doesn't work well at all - basically unwatchable. I assume this is a limitation of the mplayer software rather than the X1000 speed?

Catcha,
Epsilon

Good suggestion and welcome to the party! :-)

Trevor
Let's "Keep this party going"
User avatar
trevordick
A-Eon Technology
A-Eon Technology
 
Posts: 1177
Joined: Mon Dec 20, 2010 1:28 pm

Re: MPlayer on X1000 - Use Generic or Altivec? Play AVIs?

Postby ChrisH » Mon May 28, 2012 6:22 pm

Epsilon wrote:playback of HD content doesn't work well at all - basically unwatchable. I assume this is a limitation of the mplayer software rather than the X1000 speed?

Previous public comments from Steve Jones & others have indicated that HD videos are slow due to RadeonHD graphics driver limitations, which should hopefully be fixed in the future.
User avatar
ChrisH
Beta Tester
Beta Tester
 
Posts: 868
Joined: Mon Dec 20, 2010 9:09 pm


Return to Platform: AmigaOne X1000

Who is online

Users browsing this forum: No registered users and 1 guest