I have here only my A1200PPC and a serial cable.I must wait for the X1000DarrenHD wrote:You can enable serial debug output by following my instructions here:tommysammy wrote:@Hans-Jörg
How did i come into the bootloader command line?
http://www.hd-zone.com/2011/05/how-to-s ... 1-classic/
Basically you edit your s:startup-sequence and add some commands to the C:Bootloader line.
Like:
C:Bootloader COMMANDLINE="DEBUGLEVEL=7 SERIAL BAUDRATE=57600"
You connect a serial cable from your Amiga to another computer and capture the serial output on that computer using a terminal program set to 57600 8-N-1 in this example. You will start to see serial output after the AmigaOS 4.1 kernel loads and the Amiga resets and starts to load AmigaOS 4.1 Classic.
Darren
At this moment i can`t test it