openSUSE Tumbleweed

AmigaOne X1000 platform specific issues related to Linux only.
User avatar
jdupuis
Posts: 223
Joined: Sat May 09, 2015 7:19 am
Location: Baton Rouge, Louisiana USA

Re: openSUSE Tumbleweed

Post by jdupuis »

Hi Christian,

Tumbleweed DVD install.
During GUI Installer, click Create Partition Setup ensure that Partition-based Proposall is ticked. File System for root partition Ext4. Untick Propose Separate Home Partition then hit OK.
Suse will create:
boot/dev/sdb1 ext4 (400 MB)
root/dev/sdb2 ext4 (931 GB)
sdc5 Swap (due to Swap created by Ubuntu 12.04)
Booting not possible with "quiet ro splash" I have to "setenv bootargs "root=/dev/sdb2 [Enter] Verbose stops at these last three lines.
sh: cannot set terminal process group
sh: no job control in this shell
sh-4.3# _

As you can tell, this is where I shutdown and go outside for some air and a cigarette :) I'm at a stopping point. I do not know how to get past this part.

Cheers!!

John
C= A500 2 megs RAM with A590 w/40 MB SCSI HD and Workbench 1.3
C= A3000 25 MHz with Workbench 3.1
AmigaOne X1000 4 GB RAM, XFX Radeon HD 6670 1GB GDDR5 GPU and AmigaOS 4.1 FE/Ubuntu 12.04.5 LTS/Ubuntu Mate 16.04 LTS
Sam460ex 2GB DDR2 800 MHz RAM, XFX Radeon HD 5450 2GB GDDR3 GPU, 3114 SATA Raid, ENVY24HT sound card and AmigaOS 4.1 FE
User avatar
jdupuis
Posts: 223
Joined: Sat May 09, 2015 7:19 am
Location: Baton Rouge, Louisiana USA

Re: openSUSE Tumbleweed

Post by jdupuis »

20160521_195039.jpg
My apology for the picture quality. Taken by my Galaxy Rugby Pro.

Point: Testing with the R7 250X proving to be a challenge but would like to see it happen.
Counterpoint: Would be very easy to put the 6670 back in and call it good.

Seems like I'm moving forward by a millimeter!

Cheers!
C= A500 2 megs RAM with A590 w/40 MB SCSI HD and Workbench 1.3
C= A3000 25 MHz with Workbench 3.1
AmigaOne X1000 4 GB RAM, XFX Radeon HD 6670 1GB GDDR5 GPU and AmigaOS 4.1 FE/Ubuntu 12.04.5 LTS/Ubuntu Mate 16.04 LTS
Sam460ex 2GB DDR2 800 MHz RAM, XFX Radeon HD 5450 2GB GDDR3 GPU, 3114 SATA Raid, ENVY24HT sound card and AmigaOS 4.1 FE
User avatar
xeno74
Posts: 9349
Joined: Fri Mar 23, 2012 7:58 am

Re: openSUSE Tumbleweed

Post by xeno74 »

Hi John,

I'm sorry I don't know what happened here. Maybe the installation wasn't successfull.

Cheers,

Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
jdupuis
Posts: 223
Joined: Sat May 09, 2015 7:19 am
Location: Baton Rouge, Louisiana USA

Re: openSUSE Tumbleweed

Post by jdupuis »

xeno74 wrote:Hi John,

I'm sorry I don't know what happened here. Maybe the installation wasn't successfull.

Cheers,

Christian
Christian,

Would the XFX 6670 make a big difference here? I am left to assume that the modified CFE booting statement I have to use just to boot the Kernel may be the issue. No Splash screen - no go. What are your thoughts?

Cheers!

John
C= A500 2 megs RAM with A590 w/40 MB SCSI HD and Workbench 1.3
C= A3000 25 MHz with Workbench 3.1
AmigaOne X1000 4 GB RAM, XFX Radeon HD 6670 1GB GDDR5 GPU and AmigaOS 4.1 FE/Ubuntu 12.04.5 LTS/Ubuntu Mate 16.04 LTS
Sam460ex 2GB DDR2 800 MHz RAM, XFX Radeon HD 5450 2GB GDDR3 GPU, 3114 SATA Raid, ENVY24HT sound card and AmigaOS 4.1 FE
User avatar
mechanic
Posts: 510
Joined: Sat Jun 25, 2011 9:22 pm

Re: openSUSE Tumbleweed

Post by mechanic »

From what I have read 13.2 is at this time built for power5 to power8 processors. 13.1 is for P4/G5. Also I believe
gcc5.3 is used for the 13.2 distro and even if you get it installed there may be problems getting things to work.

It's new, perhaps a P4 product will be along in awhile.
A-Eon A1X1000 ATI HD6850, Creative SB1570 PCIe, RTL8139 net PCI.
User avatar
jdupuis
Posts: 223
Joined: Sat May 09, 2015 7:19 am
Location: Baton Rouge, Louisiana USA

Re: openSUSE Tumbleweed

Post by jdupuis »

mechanic wrote:From what I have read 13.2 is at this time built for power5 to power8 processors. 13.1 is for P4/G5. Also I believe
gcc5.3 is used for the 13.2 distro and even if you get it installed there may be problems getting things to work.

It's new, perhaps a P4 product will be along in awhile.

It was challenging and good experience. Thank you. Looking forward to the developments as they unfold.

Cheers!!

John
C= A500 2 megs RAM with A590 w/40 MB SCSI HD and Workbench 1.3
C= A3000 25 MHz with Workbench 3.1
AmigaOne X1000 4 GB RAM, XFX Radeon HD 6670 1GB GDDR5 GPU and AmigaOS 4.1 FE/Ubuntu 12.04.5 LTS/Ubuntu Mate 16.04 LTS
Sam460ex 2GB DDR2 800 MHz RAM, XFX Radeon HD 5450 2GB GDDR3 GPU, 3114 SATA Raid, ENVY24HT sound card and AmigaOS 4.1 FE
User avatar
jdupuis
Posts: 223
Joined: Sat May 09, 2015 7:19 am
Location: Baton Rouge, Louisiana USA

Re: openSUSE Tumbleweed

Post by jdupuis »

Hi all,

On a more positive note. During the OpensuSe Tumbleweed installation, the WIFI (Prism2) card I bought from AmigaKit was discovered along with PA Semi Ethernet and the Realtec 8139. During boot in Verbose, it was trying to configure Realtec, however, I did not have it connected. The Configuration screen indicated that. The installation also discovered ATI and loaded sb600 drivers (I'm connected to HDMI on R7 250X). Closing, I hope this report helps in some way for development purposes and makes this experience with Tumbleweed on my X1000 a successful failure.

Cheers!!

John
C= A500 2 megs RAM with A590 w/40 MB SCSI HD and Workbench 1.3
C= A3000 25 MHz with Workbench 3.1
AmigaOne X1000 4 GB RAM, XFX Radeon HD 6670 1GB GDDR5 GPU and AmigaOS 4.1 FE/Ubuntu 12.04.5 LTS/Ubuntu Mate 16.04 LTS
Sam460ex 2GB DDR2 800 MHz RAM, XFX Radeon HD 5450 2GB GDDR3 GPU, 3114 SATA Raid, ENVY24HT sound card and AmigaOS 4.1 FE
User avatar
Srtest
Posts: 240
Joined: Wed Jun 11, 2014 5:06 pm

Re: openSUSE Tumbleweed

Post by Srtest »

Any chance of getting tumbleweed on a compressed archive like the previous OpenSUZE? I tried to upgrade and it ruined my installation.
User avatar
xeno74
Posts: 9349
Joined: Fri Mar 23, 2012 7:58 am

Re: openSUSE Tumbleweed

Post by xeno74 »

Srtest wrote:Any chance of getting tumbleweed on a compressed archive like the previous OpenSUZE? I tried to upgrade and it ruined my installation.
Yes, sure but it takes some time because of uploading the image.
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
Posts: 9349
Joined: Fri Mar 23, 2012 7:58 am

Re: openSUSE Tumbleweed

Post by xeno74 »

Image

Hi all,

I created with dd an img of my openSUSE Tumbleweed PPC64 installation today.

Be aware, that openSUSE is experimental and isn't supported. openSUSE for the X1000 is alpha software! It's only for testing and tinkering!

Download: openSUSE_Tumbleweed_20160516_ppc64.img.tar.gz

Please note: There isn't a display manager available. You have to login via the login shell. If you don't get a login shell after booting Tumbleweed then switch to another terminal with CTRL + ALT + F key. For example CTRL + ALT + F1. You can start the Xfce Desktop Environment with startx.

Users:

root (password "amigaone")
amigaone (password "amigaone")

Cheers,

Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
Post Reply