Kernel 4.9

AmigaOne X1000 platform specific issues related to Linux only.
User avatar
xeno74
Posts: 9348
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 4.9

Post by xeno74 »

Hi All,

I compiled the new stable longterm kernel 4.9.16 including the new BFQ I/O scheduler yesterday.
BFQ loads programs extremely fast under heavy disk I/O activity. It achieves up to 30% higher throughput than CFQ on hard disks with most parallel workloads, and about the same throughput with the rest of the workloads we have considered. BFQ achieves the same throughput as CFQ, NOOP, DEADLINE and SIO on SSDs.
New:
Download: vmlinux-4.9.16-AmigaONE_X1000.tar.gz

BTW, I was able to update Fedora 25 Server PPC64 today.

Screenshot of Fedora 25 Server PPC64 with the new stable longterm kernel 4.9.16:

Image

Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
musa
Posts: 709
Joined: Tue Aug 23, 2011 7:58 pm

Re: Kernel 4.9

Post by musa »

Hi
Tried to boot MATE_PowerPC_Remix_2017_0.3 with vmlinux-4.9.16 but got this error:Fat entries should be > = 2 ran off end of fat chain !
Started ubuntu remix with a 4.9.1 kernel instead
AmigaX1000
Follow me on twitter @basjoo_dk
User avatar
xeno74
Posts: 9348
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 4.9

Post by xeno74 »

musa wrote:Hi
Tried to boot MATE_PowerPC_Remix_2017_0.3 with vmlinux-4.9.16 but got this error:Fat entries should be > = 2 ran off end of fat chain !
Started ubuntu remix with a 4.9.1 kernel instead
Hi Musa,

Many thanks for testing the test version 0.3 of the MATE PowerPC Remix 2017 and thanks a lot for testing the stable longterm kernel 4.9.16. :-)

Have you seen the error message above in the CFE firmware or have you seen it inside the kernel boot messages? Could you please test the stable kernel 4.10.5 as well?

Thanks in advance,

Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
musa
Posts: 709
Joined: Tue Aug 23, 2011 7:58 pm

Re: Kernel 4.9

Post by musa »

xeno74 wrote: Hi Musa,

Many thanks for testing the test version 0.3 of the MATE PowerPC Remix 2017 and thanks a lot for testing the stable longterm kernel 4.9.16. :-)

Have you seen the error message above in the CFE firmware or have you seen it inside the kernel boot messages? Could you please test the stable kernel 4.10.5 as well?

Thanks in advance,

Christian
Hi Christian
The error is in CFE.
Have tried booting ubuntu-mate-remix with vmlinux-9.4.16 and 4.10.5 .I get both: not an elf format executable or hold entries should > = 2.
I try to format my cf0: Disc same result and have tried putting the two files on a USB disk but same result.
My other Kernels on cf0: works
AmigaX1000
Follow me on twitter @basjoo_dk
User avatar
xeno74
Posts: 9348
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 4.9

Post by xeno74 »

musa wrote: The error is in CFE.
Hi Musa

Thanks for testing. We had the same problem in 2014.

Link: SOLVED: Ubuntu 12.04 LTS : kernel boot problem

Could you please test the stable longterm kernel 4.9.15 as well? This kernel doesn't have the BFQ I/O scheduler integrated.

Thanks
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
musa
Posts: 709
Joined: Tue Aug 23, 2011 7:58 pm

Re: Kernel 4.9

Post by musa »

xeno74 wrote:
musa wrote: The error is in CFE.
Hi Musa

Thanks for testing. We had the same problem in 2014.

Link: SOLVED: Ubuntu 12.04 LTS : kernel boot problem

Could you please test the stable longterm kernel 4.9.15 as well? This kernel doesn't have the BFQ I/O scheduler integrated.

Thanks
Christian
Hi Christian.
Thanks for info
The problem was Fat 32. reformatted to Fat 16 and all Kernler works.
It will be good if you include Gparted in the next Ubuntu-mate remix. It is important. I installed it from debian sid and it works ok.
AmigaX1000
Follow me on twitter @basjoo_dk
User avatar
xeno74
Posts: 9348
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 4.9

Post by xeno74 »

musa wrote: Hi Christian.
Thanks for info
The problem was Fat 32. reformatted to Fat 16 and all Kernler works.
Fantastic! :-)
musa wrote: It will be good if you include Gparted in the next Ubuntu-mate remix. It is important. I installed it from debian sid and it works ok.
Thanks for the hint. I will add it.
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
Posts: 9348
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 4.9

Post by xeno74 »

Hi All,

I compiled the new stable longterm kernel 4.9.17 including the new BFQ I/O scheduler today.

New:
Download: vmlinux-4.9.17-AmigaONE_X1000.tar.gz

@Musa
I have recently added GParted 0.25.0 to the MATE PowerPC Remix 2017.

Screenshot of the MATE PowerPC Remix 2017 0.4 with GParted 0.25.0 and with the new stable longterm kernel 4.9.17:

Image

Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
musa
Posts: 709
Joined: Tue Aug 23, 2011 7:58 pm

Re: Kernel 4.9

Post by musa »

xeno74 wrote:Hi All,

I compiled the new stable longterm kernel 4.9.17 including the new BFQ I/O scheduler today.

New:


@Musa
I have recently added GParted 0.25.0 to the MATE PowerPC Remix 2017.
Cheers,
Christian
Hi
Thanks for adding GParted. I have 2 wishes more. Rawtherapee and shotwell. with Gimp and these two programs is it possible to make serious photo work on Ubuntu-Mate remix :)
Unfortunately I have to format cf0 with fat 32 again as the workbench will not start with fat16 on cf0. I get this error: volume has broken clustergeometry cant mount it. Then Workbench freez.
This mean that I cant use many of the new kernels.
AmigaX1000
Follow me on twitter @basjoo_dk
User avatar
musa
Posts: 709
Joined: Tue Aug 23, 2011 7:58 pm

Re: Kernel 4.9

Post by musa »

musa wrote:
xeno74 wrote:Hi All,

I compiled the new stable longterm kernel 4.9.17 including the new BFQ I/O scheduler today.

New:


@Musa
I have recently added GParted 0.25.0 to the MATE PowerPC Remix 2017.
Cheers,
Christian
Hi
Thanks for adding GParted. I have 2 wishes more. Rawtherapee and shotwell. with Gimp and these two programs is it possible to make serious photo work on Ubuntu-Mate remix :)
Unfortunately I have to format cf0 with fat 32 again as the workbench will not start with fat16 on cf0. I get this error: volume has broken clustergeometry cant mount it. Then Workbench freez.
This mean that I cant use many of the new kernels.
Edit: I do not know why but now works 4.10.5 and 9.4.16 on cf0 with fat 32 and workbench boot again :)
AmigaX1000
Follow me on twitter @basjoo_dk
Post Reply